###################################################################
# Copyright (c) 2006 Rice University
# All Rights Reserved
# This code is covered by the Rice-WARP license
# See http://warp.rice.edu/license/ for details
###################################################################

BEGIN radio_bridge

## Peripheral Options
OPTION IPTYPE = PERIPHERAL
OPTION IMP_NETLIST = TRUE
OPTION HDL = VERILOG
OPTION ARCH_SUPPORT_MAP = (virtex2p=PREFERRED, virtex4=PREFERRED, others=AVAILABLE)
OPTION IP_GROUP = USER
OPTION USAGE_LEVEL = BASE_USER
OPTION RUN_NGCBUILD = TRUE

IO_INTERFACE IO_IF = radio_bridge, IO_TYPE = WARP_RADIOBRIDGE_V1
PARAMETER C_FAMILY = virtex2p, DT = STRING

## Ports
####################################################################################
## User Ports
## The user must connect sources/sinks to these ports in XPS in order to use
##  the radio board. The rest of the board's connections are made automatically
####################################################################################
PORT user_ADC_I = "", DIR = O, VEC = [0:13], IO_IS = userADCI
PORT user_ADC_Q = "", DIR = O, VEC = [0:13], IO_IS = userADCQ

PORT user_DAC_I = "", DIR = I, VEC = [0:15], IO_IS = userDACI
PORT user_DAC_Q = "", DIR = I, VEC = [0:15], IO_IS = userDACQ

PORT user_RxRF_gain = "", DIR = I, VEC = [0:1], IO_IS = userRxRFG
PORT user_RxBB_gain = "", DIR = I, VEC = [0:4], IO_IS = userRxBBG

PORT user_Tx_gain = "", DIR = I, VEC = [0:5], IO_IS = userTxG

PORT user_TxModelStart = "", DIR = O

PORT user_RSSI_ADC_clk = "", DIR = I

PORT user_RSSI_ADC_D = "", DIR = O, VEC = [0:9], IO_IS = userRSSI_D

PORT user_EEPROM_IO_T = "", DIR = I
PORT user_EEPROM_IO_O = "", DIR = I
PORT user_EEPROM_IO_I = "", DIR = O

PORT user_SHDN_external = "", DIR = I
PORT user_RxEn_external = "", DIR = I
PORT user_TxEn_external = "", DIR = I
PORT user_RxHP_external = "", DIR = I

####################################################################################

#Automatically tied to sys_clk_s, the OPB clock created by BSB
# Custom clock setups may need to change this
# Show defaults in System Assembly to view and change this assignment
PORT converter_clock_in = "", DIR = I, SIGIS = CLK, ASSIGNMENT = REQUIRE

PORT converter_clock_out = "", DIR = O, SIGIS = CLK

PORT radio_RSSI_ADC_clk = "", DIR = O

PORT radio_DAC_I = "", DIR = O, VEC = [15:0], IO_IS = radioDACI, ENDIAN = LITTLE
PORT radio_DAC_Q = "", DIR = O, VEC = [15:0], IO_IS = radioDACQ, ENDIAN = LITTLE

PORT radio_ADC_I = "", DIR = I, VEC = [13:0], IO_IS = radioADCI, ENDIAN = LITTLE
PORT radio_ADC_Q = "", DIR = I, VEC = [13:0], IO_IS = radioADCQ, ENDIAN = LITTLE

PORT radio_B = "", DIR = O, VEC = [6:0], IO_IS = radioGain, ENDIAN = LITTLE

PORT radio_ANTSW = "", DIR = O, VEC = [1:0], IO_IS = b2r_ANTSW, ENDIAN = LITTLE
PORT radio_LED = "", DIR = O, VEC = [2:0], IO_IS = b2r_LED, ENDIAN = LITTLE
PORT radio_DIPSW = "", DIR = I, VEC = [3:0], IO_IS = b2r_DIPSW, ENDIAN = LITTLE
PORT radio_RSSI_ADC_D = "", DIR = I, VEC = [9:0], IO_IS = b2r_RSSI_ADC_D, ENDIAN = LITTLE

PORT radio_EEPROM_IO = "", DIR = IO, THREE_STATE = FALSE, IOB_STATE = BUF 

PORT radio_spi_clk = "", DIR = O
PORT radio_spi_data = "", DIR = O
PORT radio_spi_cs = "", DIR = O
PORT radio_SHDN = "", DIR = O
PORT radio_TxEn = "", DIR = O
PORT radio_RxEn = "", DIR = O
PORT radio_RxHP = "", DIR = O
PORT radio_24PA = "", DIR = O
PORT radio_5PA = "", DIR = O
PORT radio_RX_ADC_DCS = "", DIR = O
PORT radio_RX_ADC_DFS = "", DIR = O
PORT radio_RX_ADC_PWDNA = "", DIR = O
PORT radio_RX_ADC_PWDNB = "", DIR = O
PORT radio_RSSI_ADC_CLAMP = "", DIR = O
PORT radio_RSSI_ADC_HIZ = "", DIR = O
PORT radio_RSSI_ADC_SLEEP = "", DIR = O
PORT radio_LD = "", DIR = I
PORT radio_RX_ADC_OTRA = "", DIR = I
PORT radio_RX_ADC_OTRB = "", DIR = I
PORT radio_RSSI_ADC_OTR = "", DIR = I
PORT radio_DAC_PLL_LOCK = "", DIR = I
PORT radio_DAC_RESET = "", DIR = O

PORT controller_logic_clk = "", DIR = I
PORT controller_spi_clk = "", DIR = I
PORT controller_spi_data = "", DIR = I
PORT controller_radio_cs = "", DIR = I
PORT controller_dac_cs = "", DIR = I
PORT controller_SHDN = "", DIR = I
PORT controller_TxEn = "", DIR = I
PORT controller_RxEn = "", DIR = I
PORT controller_RxHP = "", DIR = I
PORT controller_24PA = "", DIR = I
PORT controller_5PA = "", DIR = I
PORT controller_ANTSW = "", DIR = I, VEC = [0:1], IO_IS = c2b_ANTSW
PORT controller_LED = "", DIR = I, VEC = [0:2], IO_IS = c2b_LED
PORT controller_RX_ADC_DCS = "", DIR = I
PORT controller_RX_ADC_DFS = "", DIR = I
PORT controller_RX_ADC_PWDNA = "", DIR = I
PORT controller_RX_ADC_PWDNB = "", DIR = I
PORT controller_RSSI_ADC_CLAMP = "", DIR = I
PORT controller_RSSI_ADC_HIZ = "", DIR = I
PORT controller_RSSI_ADC_SLEEP = "", DIR = I
PORT controller_DIPSW = "", DIR = O, VEC = [0:3], IO_IS = c2b_DIPSW
PORT controller_RSSI_ADC_D = "", DIR = O, VEC = [0:9], IO_IS = c2b_RSSI_ADC_D
PORT controller_LD = "", DIR = O
PORT controller_RX_ADC_OTRA = "", DIR = O
PORT controller_RX_ADC_OTRB = "", DIR = O
PORT controller_RSSI_ADC_OTR = "", DIR = O
PORT controller_DAC_PLL_LOCK = "", DIR = O
PORT controller_DAC_RESET = "", DIR = I
PORT controller_TxStart = "", DIR = I
PORT dac_spi_data = "", DIR = O
PORT dac_spi_cs = "", DIR = O
PORT dac_spi_clk = "", DIR = O
PORT controller_SHDN_external = "", DIR = O
PORT controller_RxEn_external = "", DIR = O
PORT controller_TxEn_external = "", DIR = O
PORT controller_RxHP_external = "", DIR = O

END