source:
PlatformSupport/CustomPeripherals/pcores
Name | Size | Rev | Age | Author | Last Change |
---|---|---|---|---|---|
../ | |||||
analog_bridge_v1_00_a | 909 | 17 years | murphpo | updating MPD files; replaced CORE_STATE parameter with … | |
clock_board_config_v1_05_a | 1695 | 13 years | murphpo | Updated clock_board_config core MPD for compatibility with XPS/BSB 13.4 | |
eeprom_onewire_v1_10_a | 1707 | 13 years | murphpo | ||
eeprom_v1_07_a | 1167 | 16 years | murphpo | ||
fmc_bb_4da_bridge_v1_00_a | 1897 | 12 years | murphpo | ||
fmc_bb_4da_bridge_v1_00_b | 1907 | 12 years | murphpo | ||
mgt_null_controller_v1_02_a | 1441 | 15 years | sgupta | new mgt null tile peripheral, for V4 | |
radio_bridge_v1_22_a | 1416 | 15 years | sgupta | radio bridge 1.22 bug test | |
radio_bridge_v1_30_a | 1711 | 13 years | murphpo | Iterating on radio_bridge and radio_controller custom bus spec | |
radio_bridge_v2_00_a | 2032 | 12 years | murphpo | ||
radio_controller_axi_v3_00_d | 6212 | 7 years | murphpo | Fixed mapping of RF vs AD chip select masks in Tx DCO code in old … | |
radio_controller_axi_v3_01_a | 6317 | 6 years | murphpo | Updated max2829_pll_tune_val_gen.py script to work with Py3 (Py3 map … | |
radio_controller_v1_22_a | 1410 | 15 years | sgupta | updated radio controller and bridge without the rate change filters | |
radio_controller_v1_30_a | 1711 | 13 years | murphpo | Iterating on radio_bridge and radio_controller custom bus spec | |
radio_controller_v2_00_a | 4519 | 10 years | murphpo | fixed register bit mask for RC_PARAMID_RXHPF_HIGH_CUTOFF_EN | |
radio_controller_v3_00_b | 6212 | 7 years | murphpo | Fixed mapping of RF vs AD chip select masks in Tx DCO code in old … | |
radio_controller_v3_00_c | 6212 | 7 years | murphpo | Fixed mapping of RF vs AD chip select masks in Tx DCO code in old … | |
simple_spi_v1_00_a | 2445 | 11 years | murphpo | ||
sw_intr_util_v1_00_a | 6318 | 6 years | murphpo | Added getters for enA/enB/maskA/maskB register fields | |
uart_mux_v1_00_a | 2076 | 11 years | murphpo | ||
w3_ad_bridge_v3_00_g | 1785 | 12 years | murphpo | ||
w3_ad_bridge_v3_01_a | 1878 | 12 years | murphpo | Added IDELAY parameters to ad_bridge, so each instance can customize … | |
w3_ad_bridge_v3_01_b | 1878 | 12 years | murphpo | Added IDELAY parameters to ad_bridge, so each instance can customize … | |
w3_ad_bridge_v3_01_c | 2443 | 11 years | murphpo | ||
w3_ad_bridge_v3_01_d | 2443 | 11 years | murphpo | ||
w3_ad_bridge_v3_01_e | 4794 | 9 years | welsh | Fixing typo for TXCLK_OUT_en. | |
w3_ad_bridge_v3_02_a | 4716 | 9 years | murphpo | New (dev only) version of ad_bridge with separate clock I/O for RF A/B | |
w3_ad_bridge_v3_02_b | 4793 | 9 years | welsh | Updating AD bridge - Fixing typo with TXCLK_OUT_en signal. | |
w3_ad_bridge_v3_03_a | 5050 | 9 years | murphpo | Used TRXIQ to qualify I/Q data; still see difference in I/Q timing in … | |
w3_ad_bridge_v3_03_b | 5776 | 8 years | murphpo | Updated w3_ad_bridge for better handling of TRXCLK phase differences … | |
w3_ad_controller_axi_v3_01_a | 1927 | 12 years | murphpo | AXI versions of WARP v3 support cores | |
w3_ad_controller_axi_v3_02_a | 6210 | 7 years | murphpo | Added print in error check | |
w3_ad_controller_v3_00_b | 1793 | 12 years | murphpo | ||
w3_ad_controller_v3_01_a | 1913 | 12 years | murphpo | ||
w3_boot_io_mux_v1_00_a | 4298 | 10 years | murphpo | New boot_io_mux core (muxes IIC/UART between clock config core … | |
w3_clock_controller_axi_v3_01_a | 1927 | 12 years | murphpo | AXI versions of WARP v3 support cores | |
w3_clock_controller_axi_v3_01_b | 3909 | 10 years | welsh | Updating clock controller software. | |
w3_clock_controller_axi_v4_00_a | 4326 | 10 years | murphpo | Comment-only update to picoblaze assembly | |
w3_clock_controller_v3_00_b | 1872 | 12 years | murphpo | Fixed error in clock controller driver | |
w3_clock_controller_v3_01_a | 6121 | 7 years | murphpo | committing testbench for clock controller at-boot logic (wrote this a … | |
w3_clock_controller_v3_01_b | 1913 | 12 years | murphpo | ||
w3_iic_eeprom_axi_v1_00_b | 2480 | 11 years | welsh | Updated Ethernet MAC address check. | |
w3_iic_eeprom_axi_v1_01_a | 4345 | 10 years | murphpo | Added DIR=IO ports for eeprom core, allowing direct connection of … | |
w3_iic_eeprom_axi_v1_02_a | 5168 | 9 years | welsh | Updating documentation about write-protected addresses. Updated code … | |
w3_iic_eeprom_v1_00_b | 1912 | 12 years | murphpo | Minor tweaks to EEPROM controller HDL/MPD | |
w3_sd_spi_v1_00_a | 2447 | 11 years | murphpo | ||
w3_userio_axi_v1_00_a | 1927 | 12 years | murphpo | AXI versions of WARP v3 support cores | |
w3_userio_axi_v1_01_a | 4389 | 10 years | murphpo | removing unnecessary IOB constraint from userio core | |
w3_userio_axi_v1_02_a | 5615 | 8 years | murphpo | added comments to debug header IO macros | |
w3_userio_axi_v1_03_a | 5686 | 8 years | murphpo | Fixed typo in userio.h in (unused) macro for overwriting all bits in … | |
w3_userio_v1_00_a | 1787 | 12 years | murphpo | ||
w3_w2_radio_io_shim_v1_00_a | 1789 | 12 years | murphpo | ||
warp_spi_io_v1_00_a | 1873 | 12 years | murphpo | Attempting fix to SPI timing | |
warp_timer_plbw_v1_00_a | 1042 | 16 years | kwilhelm | adding warp_timer | |
warp_v4_userio_v1_00_a | 1705 | 13 years | murphpo |
Note: See TracBrowser
for help on using the repository browser.