Library {
  Name			  "WARP_Blockset"
  Version		  6.6
  MdlSubVersion		  0
  SavedCharacterEncoding  "windows-1252"
  LibraryType		  "BlockLibrary"
  SaveDefaultBlockParams  on
  SampleTimeColors	  off
  LibraryLinkDisplay	  "none"
  WideLines		  off
  ShowLineDimensions	  off
  ShowPortDataTypes	  off
  ShowLoopsOnError	  on
  IgnoreBidirectionalLines off
  ShowStorageClass	  off
  ShowTestPointIcons	  on
  ShowViewerIcons	  on
  SortedOrder		  off
  ExecutionContextIcon	  off
  ShowLinearizationAnnotations on
  ScopeRefreshTime	  0.035000
  OverrideScopeRefreshTime on
  DisableAllScopes	  off
  BlockNameDataTip	  off
  BlockParametersDataTip  off
  BlockDescriptionStringDataTip	off
  ToolBar		  on
  StatusBar		  on
  BrowserShowLibraryLinks off
  BrowserLookUnderMasks	  off
  Created		  "Wed Oct 18 14:10:55 2006"
  Creator		  "murphpo"
  UpdateHistory		  "UpdateHistoryNever"
  ModifiedByFormat	  "%<Auto>"
  LastModifiedBy	  "Sid Gupta"
  ModifiedDateFormat	  "%<Auto>"
  LastModifiedDate	  "Thu Sep 04 16:38:14 2008"
  ModelVersionFormat	  "1.%<AutoIncrement:48>"
  ConfigurationManager	  "None"
  SimulationMode	  "normal"
  LinearizationMsg	  "none"
  Profile		  off
  ParamWorkspaceSource	  "MATLABWorkspace"
  AccelVerboseBuild	  off
  CovSaveName		  "covdata"
  CovMetricSettings	  "dw"
  CovNameIncrementing	  off
  CovHtmlReporting	  on
  covSaveCumulativeToWorkspaceVar on
  CovSaveSingleToWorkspaceVar on
  CovCumulativeReport	  off
  CovReportOnPause	  on
  ExtModeBatchMode	  off
  ExtModeEnableFloating	  on
  ExtModeTrigType	  "manual"
  ExtModeTrigMode	  "normal"
  ExtModeTrigPort	  "1"
  ExtModeTrigElement	  "any"
  ExtModeTrigDuration	  1000
  ExtModeTrigDurationFloating "auto"
  ExtModeTrigHoldOff	  0
  ExtModeTrigDelay	  0
  ExtModeTrigDirection	  "rising"
  ExtModeTrigLevel	  0
  ExtModeArchiveMode	  "off"
  ExtModeAutoIncOneShot	  off
  ExtModeIncDirWhenArm	  off
  ExtModeAddSuffixToVar	  off
  ExtModeWriteAllDataToWs off
  ExtModeArmWhenConnect	  on
  ExtModeSkipDownloadWhenConnect off
  ExtModeLogAll		  on
  ExtModeAutoUpdateStatusClock on
  ProdHWDeviceType	  "32-bit Generic"
  ShowModelReferenceBlockVersion off
  ShowModelReferenceBlockIO off
  BlockDefaults {
    Orientation		    "right"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    NamePlacement	    "normal"
    FontName		    "Lucida Sans"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
    ShowName		    on
  }
  BlockParameterDefaults {
    Block {
      BlockType		      Inport
      Port		      "1"
      UseBusObject	      off
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      LatchByDelayingOutsideSignal off
      LatchByCopyingInsideSignal off
      Interpolate	      on
    }
    Block {
      BlockType		      Outport
      Port		      "1"
      UseBusObject	      off
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      OutputWhenDisabled      "held"
      InitialOutput	      "[]"
    }
    Block {
      BlockType		      Reference
    }
    Block {
      BlockType		      "S-Function"
      FunctionName	      "system"
      SFunctionModules	      "''"
      PortCounts	      "[]"
    }
    Block {
      BlockType		      SubSystem
      ShowPortLabels	      "FromPortIcon"
      Permissions	      "ReadWrite"
      PermitHierarchicalResolution "All"
      TreatAsAtomicUnit	      off
      SystemSampleTime	      "-1"
      RTWFcnNameOpts	      "Auto"
      RTWFileNameOpts	      "Auto"
      RTWMemSecFuncInitTerm   "Inherit from model"
      RTWMemSecFuncExecute    "Inherit from model"
      RTWMemSecDataConstants  "Inherit from model"
      RTWMemSecDataInternal   "Inherit from model"
      RTWMemSecDataParameters "Inherit from model"
      SimViewingDevice	      off
      DataTypeOverride	      "UseLocalSettings"
      MinMaxOverflowLogging   "UseLocalSettings"
    }
  }
  AnnotationDefaults {
    HorizontalAlignment	    "center"
    VerticalAlignment	    "middle"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    FontName		    "Arial"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
    UseDisplayTextAsClickCallback off
  }
  LineDefaults {
    FontName		    "Arial"
    FontSize		    9
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  System {
    Name		    "WARP_Blockset"
    Location		    [372, 403, 1554, 1073]
    Open		    on
    ModelBrowserVisibility  off
    ModelBrowserWidth	    200
    ScreenColor		    "white"
    PaperOrientation	    "landscape"
    PaperPositionMode	    "auto"
    PaperType		    "usletter"
    PaperUnits		    "inches"
    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
    TiledPageScale	    1
    ShowPageBoundaries	    off
    ZoomFactor		    "100"
    ReportName		    "simulink-default.rpt"
    Block {
      BlockType		      SubSystem
      Name		      "WARP Analog Board ADC/DACs"
      Ports		      []
      Position		      [379, 229, 453, 299]
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      FunctionWithSeparateData off
      MaskHideContents	      off
      System {
	Name			"WARP Analog Board ADC/DACs"
	Location		[607, 463, 1519, 1022]
	Open			off
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"usletter"
	PaperUnits		"inches"
	TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
	TiledPageScale		1
	ShowPageBoundaries	off
	ZoomFactor		"100"
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 1 ADC A"
	  Ports			  [1, 1]
	  Position		  [80, 329, 175, 371]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 1 Analog-to-Digital "
"Converter A"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Analog 1 ADC A"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog1_adc_a"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      off
	      timing_constraint	      "None"
	      locs_specified	      off
	      LOCs		      "{}"
	      xl_use_area	      off
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog1_adc_a"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "analog1_adc_a"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 1 ADC B"
	  Ports			  [1, 1]
	  Position		  [80, 394, 175, 436]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 1 Analog-to-Digital "
"Converter B"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Analog 1 ADC B"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog1_adc_b"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      off
	      timing_constraint	      "None"
	      locs_specified	      off
	      LOCs		      "{}"
	      xl_use_area	      off
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "analog1_adc_b"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog1_adc_b"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 1 DAC 1A"
	  Ports			  [1, 1]
	  Position		  [80, 29, 175, 71]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 1 Digital-to-Analog "
"Converter 1A"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 1 DAC 1A"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog1_dac1a"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog1_dac1a"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog1_dac1a"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 1 DAC 1B"
	  Ports			  [1, 1]
	  Position		  [80, 94, 175, 136]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 1 Digital-to-Analog "
"Converter1B"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 1 DAC 1B"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog1_dac1b"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog1_dac1b"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog1_dac1b"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 1 DAC 2A"
	  Ports			  [1, 1]
	  Position		  [80, 159, 175, 201]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 1 Digital-to-Analog "
"Converter 2A"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 1 DAC 2A"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog1_dac2a"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog1_dac2a"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog1_dac2a"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 1 DAC 2B"
	  Ports			  [1, 1]
	  Position		  [80, 224, 175, 266]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 1 Digital-to-Analog "
"Converter 2B"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 1 DAC 2B"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog1_dac2b"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog1_dac2b"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog1_dac2b"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 2 ADC A"
	  Ports			  [1, 1]
	  Position		  [220, 329, 315, 371]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 2 Analog-to-Digital "
"Converter A"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Analog 2 ADC A"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog2_adc_a"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      off
	      timing_constraint	      "None"
	      locs_specified	      off
	      LOCs		      "{}"
	      xl_use_area	      off
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "analog2_adc_a"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog2_adc_a"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 2 ADC B"
	  Ports			  [1, 1]
	  Position		  [220, 394, 315, 436]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 2 Analog-to-Digital "
"Converter B"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Analog 2 ADC B"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog2_adc_b"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      off
	      timing_constraint	      "None"
	      locs_specified	      off
	      LOCs		      "{}"
	      xl_use_area	      off
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog2_adc_b"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "analog2_adc_b"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 2 DAC 1A"
	  Ports			  [1, 1]
	  Position		  [220, 29, 315, 71]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 2 Digital-to-Analog "
"Converter 1A"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 2 DAC 1A"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog2_dac1a"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog2_dac1a"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog2_dac1a"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 2 DAC 1B"
	  Ports			  [1, 1]
	  Position		  [220, 94, 315, 136]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 2 Digital-to-Analog "
"Converter1B"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 2 DAC 1B"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog2_dac1b"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog2_dac1b"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog2_dac1b"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 2 DAC 2A"
	  Ports			  [1, 1]
	  Position		  [220, 159, 315, 201]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 2 Digital-to-Analog "
"Converter 2A"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 2 DAC 2A"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog2_dac2a"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog2_dac2a"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog2_dac2a"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 2 DAC 2B"
	  Ports			  [1, 1]
	  Position		  [220, 224, 315, 266]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 2 Digital-to-Analog "
"Converter 2B"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 2 DAC 2B"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog2_dac2b"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog2_dac2b"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog2_dac2b"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 3 ADC A"
	  Ports			  [1, 1]
	  Position		  [360, 329, 455, 371]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 3 Analog-to-Digital "
"Converter A"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Analog 3 ADC A"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog3_adc_a"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      off
	      timing_constraint	      "None"
	      locs_specified	      off
	      LOCs		      "{}"
	      xl_use_area	      off
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "analog3_adc_a"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog3_adc_a"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 3 ADC B"
	  Ports			  [1, 1]
	  Position		  [360, 394, 455, 436]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 3 Analog-to-Digital "
"Converter B"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Analog 3 ADC B"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog3_adc_b"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      off
	      timing_constraint	      "None"
	      locs_specified	      off
	      LOCs		      "{}"
	      xl_use_area	      off
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog3_adc_b"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "analog3_adc_b"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 3 DAC 1A"
	  Ports			  [1, 1]
	  Position		  [360, 29, 455, 71]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 3 Digital-to-Analog "
"Converter 1A"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 3 DAC 1A"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog3_dac1a"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog3_dac1a"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog3_dac1a"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 3 DAC 1B"
	  Ports			  [1, 1]
	  Position		  [360, 94, 455, 136]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 3 Digital-to-Analog "
"Converter1B"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 3 DAC 1B"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog3_dac1b"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog3_dac1b"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog3_dac1b"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 3 DAC 2A"
	  Ports			  [1, 1]
	  Position		  [360, 159, 455, 201]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 3 Digital-to-Analog "
"Converter 2A"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 3 DAC 2A"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog3_dac2a"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog3_dac2a"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog3_dac2a"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 3 DAC 2B"
	  Ports			  [1, 1]
	  Position		  [360, 224, 455, 266]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 3 Digital-to-Analog "
"Converter 2B"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 3 DAC 2B"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog3_dac2b"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog3_dac2b"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog3_dac2b"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 4 ADC A"
	  Ports			  [1, 1]
	  Position		  [505, 329, 600, 371]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 4 Analog-to-Digital "
"Converter A"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Analog 4 ADC A"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog4_adc_a"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      off
	      timing_constraint	      "None"
	      locs_specified	      off
	      LOCs		      "{}"
	      xl_use_area	      off
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "analog4_adc_a"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog4_adc_a"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 4 ADC B"
	  Ports			  [1, 1]
	  Position		  [505, 394, 600, 436]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 4 Analog-to-Digital "
"Converter B"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Analog 4 ADC B"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog4_adc_b"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      off
	      timing_constraint	      "None"
	      locs_specified	      off
	      LOCs		      "{}"
	      xl_use_area	      off
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog4_adc_b"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "analog4_adc_b"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 4 DAC 1A"
	  Ports			  [1, 1]
	  Position		  [505, 29, 600, 71]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 4 Digital-to-Analog "
"Converter 1A"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 4 DAC 1A"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog4_dac1a"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog4_dac1a"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog4_dac1a"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 4 DAC 1B"
	  Ports			  [1, 1]
	  Position		  [505, 94, 600, 136]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 4 Digital-to-Analog "
"Converter1B"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 4 DAC 1B"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog4_dac1b"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog4_dac1b"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog4_dac1b"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 4 DAC 2A"
	  Ports			  [1, 1]
	  Position		  [505, 159, 600, 201]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 4 Digital-to-Analog "
"Converter 2A"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 4 DAC 2A"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog4_dac2a"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog4_dac2a"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "analog4_dac2a"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Analog 4 DAC 2B"
	  Ports			  [1, 1]
	  Position		  [505, 224, 600, 266]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Analog Board Slot 4 Digital-to-Analog "
"Converter 2B"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Analog 4 DAC 2B"
	    Location		    [632, 683, 957, 765]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "analog4_dac2b"
	      Ports		      [1, 1]
	      Position		      [185, 30, 245, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "O"
	      Position		      [270, 33, 300, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "analog4_dac2b"
	      SrcPort		      1
	      DstBlock		      "O"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "analog4_dac2b"
	      DstPort		      1
	    }
	  }
	}
      }
    }
    Block {
      BlockType		      SubSystem
      Name		      "WARP Radio Board ADC/DACs"
      Ports		      []
      Position		      [377, 109, 451, 179]
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      FunctionWithSeparateData off
      MaskHideContents	      off
      System {
	Name			"WARP Radio Board ADC/DACs"
	Location		[635, 391, 1572, 976]
	Open			off
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"usletter"
	PaperUnits		"inches"
	TiledPaperMargins	[0.500000, 0.500000, 0.500000, 0.500000]
	TiledPageScale		1
	ShowPageBoundaries	off
	ZoomFactor		"100"
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 1 ADC I"
	  Ports			  [1, 1]
	  Position		  [80, 214, 175, 256]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 1 Analog-to-Digital C"
"onverter I-channel"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Radio 1 ADC I"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio1_adc_I"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      "off"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "radio1_adc_I"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "radio1_adc_I"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 1 ADC Q"
	  Ports			  [1, 1]
	  Position		  [80, 284, 175, 326]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 1 Analog-to-Digital C"
"onverter Q-channel"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Radio 1 ADC Q"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio1_adc_Q"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      "off"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "radio1_adc_Q"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "radio1_adc_Q"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 1 DAC I"
	  Ports			  [1, 1]
	  Position		  [80, 29, 175, 71]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 1 Digital-to-Analog C"
"onverter I-channel"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Radio 1 DAC I"
	    Location		    [962, 588, 1402, 753]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "16"
	      bin_pt		      "15"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio1_dac_I"
	      Ports		      [1, 1]
	      Position		      [165, 30, 225, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "-1,-1,-1,-1"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out"
	      Position		      [250, 33, 280, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "radio1_dac_I"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "radio1_dac_I"
	      SrcPort		      1
	      DstBlock		      "Out"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 1 DAC Q"
	  Ports			  [1, 1]
	  Position		  [80, 109, 175, 151]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 1 Digital-to-Analog C"
"onverter Q-channel"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Radio 1 DAC Q"
	    Location		    [962, 588, 1402, 753]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "16"
	      bin_pt		      "15"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio1_dac_Q"
	      Ports		      [1, 1]
	      Position		      [165, 30, 225, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,336,386"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out"
	      Position		      [250, 33, 280, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "radio1_dac_Q"
	      SrcPort		      1
	      DstBlock		      "Out"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "radio1_dac_Q"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 2 ADC I"
	  Ports			  [1, 1]
	  Position		  [230, 214, 325, 256]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 2 Analog-to-Digital C"
"onverter I-channel"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Radio 2 ADC I"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio2_adc_I"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      "off"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "radio2_adc_I"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "radio2_adc_I"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 2 ADC Q"
	  Ports			  [1, 1]
	  Position		  [230, 284, 325, 326]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 2 Analog-to-Digital C"
"onverter Q-channel"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Radio 2 ADC Q"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio2_adc_Q"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      "off"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "radio2_adc_Q"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "radio2_adc_Q"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 2 DAC I"
	  Ports			  [1, 1]
	  Position		  [230, 29, 325, 71]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 2 Digital-to-Analog C"
"onverter I-channel"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Radio 2 DAC I"
	    Location		    [962, 588, 1402, 753]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "16"
	      bin_pt		      "15"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio2_dac_I"
	      Ports		      [1, 1]
	      Position		      [165, 30, 225, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "-1,-1,-1,-1"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out"
	      Position		      [250, 33, 280, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "radio2_dac_I"
	      SrcPort		      1
	      DstBlock		      "Out"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "radio2_dac_I"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 2 DAC Q"
	  Ports			  [1, 1]
	  Position		  [230, 109, 325, 151]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 2 Digital-to-Analog C"
"onverter Q-channel"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Radio 2 DAC Q"
	    Location		    [962, 588, 1402, 753]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "16"
	      bin_pt		      "15"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio2_dac_Q"
	      Ports		      [1, 1]
	      Position		      [165, 30, 225, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "-1,-1,-1,-1"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out"
	      Position		      [250, 33, 280, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "radio2_dac_Q"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "radio2_dac_Q"
	      SrcPort		      1
	      DstBlock		      "Out"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 3 ADC I"
	  Ports			  [1, 1]
	  Position		  [380, 214, 475, 256]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 3 Analog-to-Digital C"
"onverter I-channel"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Radio 3 ADC I"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio3_adc_I"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      "off"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "radio3_adc_I"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "radio3_adc_I"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 3 ADC Q"
	  Ports			  [1, 1]
	  Position		  [380, 284, 475, 326]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 3 Analog-to-Digital C"
"onverter Q-channel"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Radio 3 ADC Q"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio3_adc_Q"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      "off"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "radio3_adc_Q"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "radio3_adc_Q"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 3 DAC I"
	  Ports			  [1, 1]
	  Position		  [380, 29, 475, 71]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 3 Digital-to-Analog C"
"onverter I-channel"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Radio 3 DAC I"
	    Location		    [962, 588, 1402, 753]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "16"
	      bin_pt		      "15"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio3_dac_I"
	      Ports		      [1, 1]
	      Position		      [165, 30, 225, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "-1,-1,-1,-1"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out"
	      Position		      [250, 33, 280, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "radio3_dac_I"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "radio3_dac_I"
	      SrcPort		      1
	      DstBlock		      "Out"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 3 DAC Q"
	  Ports			  [1, 1]
	  Position		  [380, 109, 475, 151]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 3 Digital-to-Analog C"
"onverter Q-channel"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Radio 3 DAC Q"
	    Location		    [962, 588, 1402, 753]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "16"
	      bin_pt		      "15"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio3_dac_Q"
	      Ports		      [1, 1]
	      Position		      [165, 30, 225, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "-1,-1,-1,-1"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out"
	      Position		      [250, 33, 280, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "radio3_dac_Q"
	      SrcPort		      1
	      DstBlock		      "Out"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "radio3_dac_Q"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 4 ADC I"
	  Ports			  [1, 1]
	  Position		  [525, 214, 620, 256]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 4 Analog-to-Digital C"
"onverter I-channel"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Radio 4 ADC I"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio4_adc_I"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      "off"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "radio4_adc_I"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "radio4_adc_I"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 4 ADC Q"
	  Ports			  [1, 1]
	  Position		  [525, 284, 620, 326]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 4 Analog-to-Digital C"
"onverter Q-channel"
	  MaskPromptString	  "Sample Period"
	  MaskStyleString	  "edit"
	  MaskTunableValueString  "on"
	  MaskEnableString	  "on"
	  MaskVisibilityString	  "on"
	  MaskToolTipString	  "on"
	  MaskVariables		  "samp_period=@1;"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "1"
	  System {
	    Name		    "Radio 4 ADC Q"
	    Location		    [755, 671, 1131, 852]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "In1"
	      Position		      [25, 28, 55, 42]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio4_adc_Q"
	      Ports		      [1, 1]
	      Position		      [95, 25, 160, 45]
	      SourceBlock	      "xbsIndex_r4/Gateway In"
	      SourceType	      "Xilinx Gateway In Block"
	      infoedit		      "Gateway in block.  Converts inputs of t"
"ype Simulink integer, double and fixed point to  Xilinx fixed point type.<P><"
"P>Hardware notes:  In hardware these blocks become top level input ports."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "14"
	      bin_pt		      "13"
	      quantization	      "Round  (unbiased: +/- Inf)"
	      overflow		      "Flag as error"
	      period		      "samp_period"
	      dbl_ovrd		      "off"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,348,406"
	      block_type	      "gatewayin"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "65,20,1,1,white,yellow,0,bc55d28f,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 65 65 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([27 24 29 24 "
"27 32 33 34 40 36 32 29 34 29 32 36 40 34 33 32 27 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 65 65 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,'\\fontsize{11pt}\\bf"
" In ','texmode','on');\ncolor('black');port_label('output',1,' ');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out1"
	      Position		      [185, 28, 215, 42]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "In1"
	      SrcPort		      1
	      DstBlock		      "radio4_adc_Q"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "radio4_adc_Q"
	      SrcPort		      1
	      DstBlock		      "Out1"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 4 DAC I"
	  Ports			  [1, 1]
	  Position		  [525, 29, 620, 71]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 4 Digital-to-Analog C"
"onverter I-channel"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Radio 4 DAC I"
	    Location		    [962, 588, 1402, 753]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "16"
	      bin_pt		      "15"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio4_dac_I"
	      Ports		      [1, 1]
	      Position		      [165, 30, 225, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "-1,-1,-1,-1"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out"
	      Position		      [250, 33, 280, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "radio4_dac_I"
	      SrcPort		      1
	      DstBlock		      "Out"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "radio4_dac_I"
	      DstPort		      1
	    }
	  }
	}
	Block {
	  BlockType		  SubSystem
	  Name			  "Radio 4 DAC Q"
	  Ports			  [1, 1]
	  Position		  [525, 109, 620, 151]
	  MinAlgLoopOccurrences	  off
	  RTWSystemCode		  "Auto"
	  FunctionWithSeparateData off
	  MaskHideContents	  off
	  MaskDescription	  "WARP Radio Board Slot 4 Digital-to-Analog C"
"onverter Q-channel"
	  MaskDisplay		  "image(imread('WARP_Logo.jpg'))"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  System {
	    Name		    "Radio 4 DAC Q"
	    Location		    [962, 588, 1402, 753]
	    Open		    off
	    ModelBrowserVisibility  off
	    ModelBrowserWidth	    200
	    ScreenColor		    "white"
	    PaperOrientation	    "landscape"
	    PaperPositionMode	    "auto"
	    PaperType		    "usletter"
	    PaperUnits		    "inches"
	    TiledPaperMargins	    [0.500000, 0.500000, 0.500000, 0.500000]
	    TiledPageScale	    1
	    ShowPageBoundaries	    off
	    ZoomFactor		    "100"
	    Block {
	      BlockType		      Inport
	      Name		      "I"
	      Position		      [25, 33, 55, 47]
	      IconDisplay	      "Port number"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "Convert"
	      Ports		      [1, 1]
	      Position		      [80, 25, 125, 55]
	      SourceBlock	      "xbsIndex_r4/Convert"
	      SourceType	      "Xilinx Type Converter Block"
	      infoedit		      "Hardware notes: rounding and saturating"
" require hardware resources; truncating and wrapping do not."
	      arith_type	      "Signed  (2's comp)"
	      n_bits		      "16"
	      bin_pt		      "15"
	      quantization	      "Truncate"
	      overflow		      "Flag as error"
	      latency		      "0"
	      dbl_ovrd		      "off"
	      pipeline		      "off"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "20,20,461,334"
	      block_type	      "convert"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "45,30,1,1,white,blue,0,74901e60,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 45 45 0 ],[0 0 30 30 ],[0.77 0.82 0.91]);\npatch([15 10 17 10 "
"15 23 25 27 35 28 22 17 23 17 22 28 35 27 25 23 15 ],[3 8 15 22 27 27 25 27 2"
"7 20 26 21 15 9 4 10 3 3 5 3 3 ],[0.98 0.96 0.92]);\nplot([0 45 45 0 0 ],[0 0"
" 30 30 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT:"
" begin icon text');\ncolor('black');port_label('output',1,'cast');\nfprintf('"
"','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Reference
	      Name		      "radio4_dac_Q"
	      Ports		      [1, 1]
	      Position		      [165, 30, 225, 50]
	      SourceBlock	      "xbsIndex_r4/Gateway Out"
	      SourceType	      "Xilinx Gateway Out Block"
	      infoedit		      "Gateway out block.  Converts Xilinx fix"
"ed point inputs into ouputs of type Simulink integer, double, or fixed point."
"<P><P>Hardware notes:  In hardware these blocks become top level output ports"
" or are discarded, depending on how they are configured."
	      hdl_port		      "on"
	      timing_constraint	      "None"
	      locs_specified	      "off"
	      LOCs		      "{}"
	      xl_use_area	      "off"
	      xl_area		      "[0,0,0,0,0,0,0]"
	      has_advanced_control    "0"
	      sggui_pos		      "-1,-1,-1,-1"
	      block_type	      "gatewayout"
	      block_version	      "10.1.2"
	      sg_icon_stat	      "60,20,1,1,white,yellow,0,38220381,right"
	      sg_mask_display	      "fprintf('','COMMENT: begin icon graphic"
"s');\npatch([0 60 60 0 ],[0 0 20 20 ],[0.95 0.93 0.65]);\npatch([24 21 26 21 "
"24 29 30 31 37 33 29 26 31 26 29 33 37 31 30 29 24 ],[2 5 10 15 18 18 17 18 1"
"8 14 18 15 10 5 2 6 2 2 3 2 2 ],[0.98 0.96 0.92]);\nplot([0 60 60 0 0 ],[0 0 "
"20 20 0 ]);\nfprintf('','COMMENT: end icon graphics');\nfprintf('','COMMENT: "
"begin icon text');\ncolor('black');port_label('input',1,' ');\ncolor('black')"
";port_label('output',1,'\\fontsize{11pt}\\bf Out ','texmode','on');\nfprintf("
"'','COMMENT: end icon text');\n"
	    }
	    Block {
	      BlockType		      Outport
	      Name		      "Out"
	      Position		      [250, 33, 280, 47]
	      IconDisplay	      "Port number"
	      BusOutputAsStruct	      off
	    }
	    Line {
	      SrcBlock		      "Convert"
	      SrcPort		      1
	      DstBlock		      "radio4_dac_Q"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "I"
	      SrcPort		      1
	      DstBlock		      "Convert"
	      DstPort		      1
	    }
	    Line {
	      SrcBlock		      "radio4_dac_Q"
	      SrcPort		      1
	      DstBlock		      "Out"
	      DstPort		      1
	    }
	  }
	}
      }
    }
  }
}