Changes between Version 7 and Version 8 of 802.11/Usage/AP


Ignore:
Timestamp:
Mar 22, 2016, 5:28:03 PM (3 years ago)
Author:
welsh
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • 802.11/Usage/AP

    v7 v8  
    1313== User IO ==
    1414
    15 '''Hex Displays''': the AP uses the hex displays to show the number of associated stations. The displays will change in real time as stations join and leave the network. The right display also blinks slowly to indicate that the node is an AP; this helps distinguish AP nodes from STA nodes.
     15'''Hex Displays''': the AP uses the hex displays to show the number of associated stations. The displays will change in real time as stations join and leave the network. The right display also blinks slowly to indicate that the node is an AP; this helps distinguish AP nodes from STA nodes.  If the BSS is Null, then "'''--'''" will be displayed.
    1616
    17 '''DIP Switch''': the AP uses the left-most switch to enable or disable new associations at boot. When the switch is up the AP will not accept associations via wireless handshakes. Associations can still be established via wlan_exp commands. This mode is very useful for running experiments with networks of WARP nodes (some AP, some STA) without allowing associations from non-WARP devices.
     17'''DIP Switch''': the AP uses the left-most switch to enable or disable the default BSS at boot. When the switch is up the AP's BSS will be initialized to Null (i.e. it will not transmit beacons; not respond to Probe Requests; not allow associations via wireless handshakes).  The BSS can be configured and associations can still be established via wlan_exp commands.
    1818
    1919== UART ==