Changes between Version 3 and Version 4 of 802.11/Usage/AP

Timestamp:

Oct 22, 2014, 4:09:51 PM (9 years ago)

Author:

murphpo

Comment:

--

802.11/Usage/AP

@@ -8 +8 @@
 == User IO ==
 
+'''Hex Displays''': the AP uses the hex displays to show the number of associated stations. The displays will change in real time as stations join and leave the network. The right display also blinks slowly to indicate the AP will accept new associations. This blinking is a good way to distinguish the AP from other MAC applications when the displayed value is 0.
 
-
+'''DIP Switch''': the AP uses the left-most switch to enable or disable new associations at boot. When the switch is up the AP will not accept associations via wireless handshakes. Associations can still be established via wlan_exp commands. This mode is very useful for running experiments with networks of WARP nodes (some AP, some STA) without allowing associations from non-WARP devices.
 
 == UART ==