Changes between Version 1 and Version 2 of 802.11/Usage/UART
- Timestamp:
- Oct 22, 2014, 2:09:11 PM (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
802.11/Usage/UART
v1 v2 5 5 The 802.11 Reference Design hardware implements two MicroBlaze cores, CPU High and CPU Low. Both CPUs have UART cores attached to their peripheral buses. The UARTs act as STDIN and STDOUT for programs running in the CPUs. Every MAC application in the reference design prints boot and debug info the UART. Each application also implements some control via UART input. The pre-application specifics are described below. 6 6 7 == UART M UX==7 == UART Mux == 8 8 The WARP v3 board has [wiki:HardwareUsersGuides/WARPv3/UART one UART-USB transceiver]. Refer to the [wiki:howto/USB_UART USB-UART Howto] for instructions on setting up your PC to use the USB-UART interface. 9 9