Changes between Version 5 and Version 6 of 802.11/wlan_exp/app_notes/dcf_with_multiple_flows/appendix


Ignore:
Timestamp:
May 7, 2014, 10:58:40 PM (10 years ago)
Author:
murphpo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • 802.11/wlan_exp/app_notes/dcf_with_multiple_flows/appendix

    v5 v6  
    1111[[Image(wiki:802.11/wlan_exp/app_notes/dcf_with_multiple_flows/figs:OTW_setup.png, width=500)]]
    1212
    13 The above figure shows the experimental setup. The RF power splitter/combiner used is a [https://warpproject.org/trac/attachment/wiki/802.11/wlan_exp/app_notes/dcf_with_multiple_flows/figs/ZAPD-2-272%2B.pdf Mini-Circuits ZAPD-2-272+]. The above configuration of attenuators roughly approximates an equilateral triangle topology, where each of the three nodes is connected with and is in carrier sensing range of the other two.
     13The above figure shows the experimental setup. The RF power splitter/combiner used is a [https://warpproject.org/trac/attachment/wiki/802.11/wlan_exp/app_notes/dcf_with_multiple_flows/figs/ZAPD-2-272%2B.pdf?format=raw Mini-Circuits ZAPD-2-272+]. The above configuration of attenuators roughly approximates an equilateral triangle topology, where each of the three nodes is connected with and is in carrier sensing range of the other two.
    1414
    1515 * Packet Length: 1400 byte payloads (1428 byte MPDUs, with MAC header and FCS)