| 1 | == WARP Daughtercard Specification == |
| 2 | |
| 3 | === Schematic === |
| 4 | |
| 5 | [[Image(WARPImages:DaughtercardSlotSchematic.png)]] |
| 6 | |
| 7 | |
| 8 | ---- |
| 9 | |
| 10 | === Mechanical === |
| 11 | |
| 12 | [[Image(WARPImages:Daughtercard_Mech_Drawing.png)]] |
| 13 | |
| 14 | * A = 1.471"; vertical distance from center of pin 1 to center of pin 81 |
| 15 | * B1 = 1.923"; horizontal distance from left edge to pin 1/81 vertical |
| 16 | * B2 = 1.005"; horizontal distance from right edge to pin 1/81 vertical |
| 17 | * C = 0.735"; vertical distance from mounting hole center to pin 1 |
| 18 | * D = 0.883"; horizontal distance from mounting hole center to pin 1/81 vertical |
| 19 | * E = 2.928"; horizontal edge to edge |
| 20 | * F = 1.780"; vertical edge to edge |
| 21 | * øG = 0.1" (diameter before plating); plated mounting hole (connected to ground) |
| 22 | |
| 23 | WARP daughtercards use two 80 pin 4mm headers with metal fittings from the DF17 series of connectors from Hirose. The Hirose part number is DF17(4.0)-80DP-0.5V(51). See [attachment:wiki:WARPFiles:Hirose_DF17_Connectors_Datasheet.pdf?format=raw Hirose DF17 Connectors Datasheet] for the full mechanical and PCB footprint details. |
| 24 | |
| 25 | === Reference Designs === |
| 26 | [attachment:wiki:WARPFiles:Daughtercard_Template_Schematic.zip?format=raw Daughtercard_Template_Schematic.zip] |
| 27 | |
| 28 | [attachment:wiki:WARPFiles:Daughtercard_Template_Board.zip?format=raw Daughtercard_Template_Board.zip] |