Changes between Version 9 and Version 10 of FAQ

Timestamp:

Jun 20, 2006, 4:16:10 AM (18 years ago)

Author:

snovich

Comment:

--

FAQ

@@ -28 +28 @@
  1. Incorrect cable type (this is most common): the WARP FPGA board's RS-232 interface is configured exactly like a PC. In order to connect it directly to another PC, you need a null modem cable or adapter (i.e. one which cross the Tx and Rx signals).
  1. A system with a different hardware configuration has been redownloaded to WARP. In rare cases, the program running in the FPGA's PowerPC can lock up if a new system has been downloaded that has a different hardware configuration. The solution to this is to simply power cycle the board; be sure to leave the board off for a few seconds to allow the capacitors to discharge.
+
+=== During Bitstream generation in XPS, the process gets stuck at "Using Options File: xflow.opt" in the output display. ===
+This occurs when the user has insignificent read/write privelages on the computer.
+
+=== I cannot get my personal peripheral repository to appear every time I open Xilinx Platform Studio ===
+Move your peripheral repository to (or make sure it is in):
+{{{
+<xilinx_install_drive>:\EDK_user_repository\<folder of any name containing drivers and pcores>
+}}}
+
+
+
+