Changes between Version 6 and Version 7 of GettingStarted/WARPv3/Tools

Timestamp:

Aug 3, 2012, 12:32:37 PM (12 years ago)

Author:

chunter

Comment:

--

GettingStarted/WARPv3/Tools

@@ -56 +56 @@
 }}}
 {{{#!td
-Matlab is required for Xilinx System Generator and also for the [wiki:WARPLab WARPLab design flow].
+[#matlab Notes]
 }}}
 |----------------
@@ -69 +69 @@
 }}}
 {{{#!td
-Any SVN client can be used, but we recommend TortoiseSVN if the user is using Windows operating system. Instructions for downloading the WARP SVN repository are available [wiki:edk_user_repository here].
+[#svnclient]
 }}}
 |----------------
@@ -82 +82 @@
 }}}
 {{{#!td
-PuTTY is used to communicate with the WARP board via UART. Instructions for setting up PuTTY to do this are [wiki:HowTo/SetUpPuTTY here].
+[#putty Notes]
 }}}
 
@@ -96 +96 @@
 === Xilinx Tools === #xilinxtools
 A full installation of the Xilinx tools is necessary for building custom FPGA designs. An SDK-only installation (with less stringent licensing requirements) is also available and can be used if the user only wants to update software designs. For example, this reduced installation would be appropriate for customizing the MAC behavior of our [wiki:OFDMReferenceDesign OFDM Reference Design].
+
+=== Matlab === #matlab
+Matlab is required for Xilinx System Generator and also for the [wiki:WARPLab WARPLab design flow].
+
+=== TortoiseSVN === #svnclient
+Any SVN client can be used, but we recommend TortoiseSVN if the user is using Windows operating system. Instructions for downloading the WARP SVN repository are available [wiki:edk_user_repository here].
+
+=== PuTTY === #putty
+PuTTY is used to communicate with the WARP board via UART. Instructions for setting up PuTTY to do this are [wiki:HowTo/SetUpPuTTY here].