[[TracNav(HardwareUsersGuides/ClockBoard_v1.0/TOC)]] == WARP Clock Board Connectors == [[Image(HardwareUsersGuides/ClockBoard_v1.0/Images:Clock_Board_connectors.png)]] [[BR]] || '''Connector''' || '''In/Out''' || '''Function''' || '''Connection''' || || J6/J10/J11/J12 || Outputs || Identical radio reference clock outputs || Connect to radio boards via coaxial cable || || J7/J8/J9/J13 || Outputs || Identical sampling clock outputs || Connect to radio boards via twisted pair cable || || J2 || Input || External radio reference input || Optionally connect to J4 on primary clock board || || J4 || Output || External radio reference output || Optionall connect to J2 on secondary clock board || || J3 || Input || External sampling clock input || Optionally connect to J5 on primary clock board || || J5 || Output || External sampling clock output || Optionally connect to J3 on secondary clock board || === Differential Connectors === The four sampling clock outputs (J7/J8/J9/J13) have four pins- 2 for ground and 2 for each half of the differential clock signal. The mapping of signals to these four connectors is illustrated below. The polarity of these clock signals must match the polarity of the clock input at the radio board. [[Image(HardwareUsersGuides/ClockBoard_v1.0/Images:Clock_Board_posNegConnectors.png)]]