Changes between Version 1 and Version 2 of HardwareUsersGuides/RadioBoard_v1.4/RadioBridge


Ignore:
Timestamp:
Sep 3, 2008, 3:13:47 PM (16 years ago)
Author:
sgupta
Comment:

Name changed from RadioBridge to HardwareUsersGuides/RadioBoard_v1.4/RadioBridge

Legend:

Unmodified
Added
Removed
Modified
  • HardwareUsersGuides/RadioBoard_v1.4/RadioBridge

    v1 v2  
    11= Radio Bridge =
    2 The radio bridge is a custom peripheral which provides the external connections for the [wiki:RadioController radio controller] core. The bridge contains no logic; its only job is to tie the radio controller's ports to whichever daughtercard slots contain WARP radio boards. Abstracting these connections to a separate peripheral allows the use of a single radio controller core with arbitrary arrangements of radio boards.
     2The radio bridge is a custom peripheral which provides the external connections for the [wiki:HardwareUsersGuides/RadioBoard_v1.4/RadioController radio controller] core. The bridge contains no logic; its only job is to tie the radio controller's ports to whichever daughtercard slots contain WARP radio boards. Abstracting these connections to a separate peripheral allows the use of a single radio controller core with arbitrary arrangements of radio boards.
    33
    44The radio bridge is a standard EDK peripheral and is required when using the radio controller. Up to four instances of the radio bridge core can be included in a hardware system. If the bridges are enabled when building a new project through Base System Builder, the core's connections and pin constraints will be handled automatically.