Changes between Version 3 and Version 4 of HardwareUsersGuides/RadioBoard_v1.4/RadioController

Timestamp:

Jul 4, 2006, 8:45:48 PM (18 years ago)

Author:

sgupta

Comment:

--

HardwareUsersGuides/RadioBoard_v1.4/RadioController

@@ -9 +9 @@
  1. Use the Base System Builder to set up a new project in Xilinx Platform Studio (refer to [wiki:peripheral_test User's Guide] to see how to set up a project that tests the basic peripherals on the FPGA board).
  1. Check the box referring to the Radio Controller to include it.
- 1. Also you will see four other peripherals called Radio Bridges. Each of these refer to a daughtercard slot on the FPGA board. If your radio is in slot 2, check the box for Radio_Bridge_2. If you have mutliple radios you may check more than one bridge. 
+ 1. Also you will see four other peripherals called [wiki:RadioBridge Radio Bridges]. Each of these refer to a daughtercard slot on the FPGA board. If your radio is in slot 2, check the box for Radio_Bridge_2. If you have mutliple radios you may check more than one bridge. 
 ''To use the Radio Controller you must have alteast one Radio Bridge included. Also setting up Radio Bridge without the Radio Controller does not provide with any tools to use the radios.''
-
-You should now have a Radio Controller peripheral in your project.
-