Changes between Version 3 and Version 4 of HardwareUsersGuides/RadioBoard_v1.4/Usage/TxDCOffset


Ignore:
Timestamp:
Apr 10, 2007, 12:03:14 AM (17 years ago)
Author:
murphpo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • HardwareUsersGuides/RadioBoard_v1.4/Usage/TxDCOffset

    v3 v4  
    1313The calibration algorithm is not publically available. However, we do distribute an FPGA configuration file which executes the calibration process automatically.
    1414
    15  1. Download a copy configuraiton file - [attachment:wiki:HardwareUsersGuides/RadioBoard_v1.4/Usage/TxDCOffset/Files:TxDCO_Calibrate.bit?format=raw TxDCO_Calibrate.bit]
     15 1. Download a copy of this configuraiton file - [attachment:wiki:HardwareUsersGuides/RadioBoard_v1.4/Usage/TxDCOffset/Files:TxDCO_Calibrate.bit?format=raw TxDCO_Calibrate.bit]
    1616 1. Use the DIP switch on the WARP FPGA Board to select which radios should be calibrated. Each switch position corresponds to a radio. The LSB (Radio #1) is the bottom switch; MSB (Radio #4) is the top.
    1717 1. Connect a serial cable to the FPGA board and set your terminal emulator to 57600bps