Changes between Version 4 and Version 5 of HardwareUsersGuides/RadioBoard_v1.4/Usage/TxDCOffset
- Timestamp:
- Apr 10, 2007, 12:03:25 AM (17 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
HardwareUsersGuides/RadioBoard_v1.4/Usage/TxDCOffset
v4 v5 14 14 15 15 1. Download a copy of this configuraiton file - [attachment:wiki:HardwareUsersGuides/RadioBoard_v1.4/Usage/TxDCOffset/Files:TxDCO_Calibrate.bit?format=raw TxDCO_Calibrate.bit] 16 1. Use the DIP switch on the WARP FPGA Board to select which radios should be calibrated. Each switch position corresponds to a radio. The LSB (Radio #1) is the bottom switch; MSB (Radio#4) is the top.16 1. Use the DIP switch on the WARP FPGA Board to select which radios should be calibrated. Each switch position corresponds to a radio. The LSB (Radio !#1) is the bottom switch; MSB (Radio !#4) is the top. 17 17 1. Connect a serial cable to the FPGA board and set your terminal emulator to 57600bps 18 18 1. Power on the FPGA board and wait for a few minutes; this allows components to warm up