WARP User I/O Board Overview

The WARP User I/O Board provides a number of input/output interfaces. Each interface is tied to dedicated pins on the daughtercard headers. All of the control is handled by user code in the FPGA.

The board provides the following:

  • 132x132 LCD screen
  • 5-way trackball
  • 8 discrete LEDs
  • Piezo buzzer
  • 8 push buttons (6 small, 2 big)
  • 4-position DIP switch

The locations of these components are illustrated below. Use the links at the right for more details on each interface.

Last modified 16 years ago Last modified on Aug 5, 2008, 2:19:02 AM