Changes between Version 3 and Version 4 of HardwareUsersGuides/WARPv3/RF


Ignore:
Timestamp:
Aug 12, 2012, 3:24:57 PM (12 years ago)
Author:
murphpo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • HardwareUsersGuides/WARPv3/RF

    v3 v4  
    1313Every node is calibrated during manufacturing, with the calibration values stored in the board's EEPROM. You should read and apply these calibration values in every custom design which uses the RF interfaces.
    1414
    15 The Tx DCO calibration values are stored at dedicated bytes in the EEPROM. See the [wiki:./EEPROM EEPROM page] for details.
     15The Tx DCO calibration values are stored at dedicated bytes in the EEPROM. See the [wiki:../EEPROM EEPROM page] for details.
    1616
    1717The WARP v3 design uses auxiliary DACs in the AD9963 to apply small DC offsets to the differential I/Q DAC outputs. The auxiliary DACs are configured via SPI. The [wiki:/cores/w3_ad_controller w3_ad_controller] driver provides functions for writing the DAC values from user code.