Changes between Version 14 and Version 15 of OFDMReferenceDesign

Timestamp:

Mar 29, 2007, 4:59:33 PM (17 years ago)

Author:

cjcamp

Comment:

--

OFDMReferenceDesign

@@ -17 +17 @@
 Several cable connections must be made on each WARP kit before this demo may be performed:
 
-   - a 12 V power supply connection to the FPGA board's power input,
-   - an antenna connection to the "outside" antenna port of the radio board,
-   - an MMCX-to-MMCX cable connected between the clock board and the radio board, and
-   - a wired Ethernet connection between each WARP kit and one of the local computers,
+   - a 12 V power supply connection to the FPGA board's power input;
+   - an antenna connection to the "outside" antenna port of the radio board;
+   - an MMCX-to-MMCX cable connected between the clock board and the radio board; and
+   - a wired Ethernet connection between each WARP kit and one of the local computers.
 
 The following images illustrate each of these connections.  EXERCISE EXTREME CAUTION WHEN PLUGING A CABLE INTO THE CLOCK BOARD, AS THE INTERFACE BETWEEN IT AND THE FPGA BOARD IS EXTREMELY DELICATE!  THE CLOCK BOARD SHOULD BE GRASPED FIRMLY BE THE EDGES TO PREVENT ANY ROCKING MOTION WHEN INSTALLING THE MMCX-TO-MMCX CABLE.