OFDM Networking Reference Design

By default, this project creates a custom wireless ethernet hub between computers attached to two WARP boards. One board must by configured as Node 0, and other as Node 1, using the on-board dip switches. This project requires two WARP FPGA boards (v1.2) and two WARP radio boards (v1.4). The radio boards must be mounted in daughtercard slot #2 on the FPGA boards. You must use EDK 8.2 (service pack 2) to use this project.

Download the full reference design here: ​OFDM Reference Design (64MB .zip file).

ChangeLog

v01 --updated by CRH 2/16/2007

• Added a new MIMO-capable packet detector and optimized timing parameters in the MAC