Changes between Version 18 and Version 19 of WARPLab/BufferSizes

Timestamp:

Feb 9, 2015, 4:09:02 PM (9 years ago)

Author:

welsh

Comment:

--

WARPLab/BufferSizes

@@ -3 +3 @@
 = WARPLab: Sample Buffer Sizes  =
 
-In WARPLab 7.4 and earlier, all transmit and receive samples were stored in buffers of BRAM directly on the FPGA. As of WARPLab 7.5 these samples are buffered in the BRAM but stored in the DRAM SODIMM attached to the WARP v3 hardware.
+In WARPLab 7.4 and earlier, all transmit and receive samples were stored in buffers of BRAM directly on the FPGA. As of WARPLab 7.5 these samples are buffered in the BRAM but stored in the DRAM SODIMM attached to the WARP v3 hardware.  For each interface:
 
 || ||=  '''WARPLab 7.4'''  =||=  '''WARPLab 7.5 (4RF)'''  =||=  '''WARPLab 7.5 (2RF)'''  =||
-|| Tx max samples  ||  32 kSamp  ||  56 MSamp  per interface ||  112 MSamp per interface ||
+|| Tx max samples  ||  32 kSamp  ||  56 MSamp  ||  112 MSamp  ||
 || Tx max duration at 40MHz sampling  ||  819.2 µsec  ||  1.468 sec  ||  2.9360 sec  ||
-|| Rx max samples  ||  32 kSamp  ||  64 MSamp per interface ||  128 MSamp per interface ||
+|| Rx max samples  ||  32 kSamp  ||  64 MSamp  ||  128 MSamp  ||
 || Rx max duration at 40MHz sampling  ||  819.2 µsec  ||  1.6777 sec  ||  3.3554 sec  ||