Changes between Version 22 and Version 23 of WARPLab/BufferSizes


Ignore:
Timestamp:
Mar 13, 2015, 3:43:36 PM (9 years ago)
Author:
welsh
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WARPLab/BufferSizes

    v22 v23  
    33= WARPLab: Sample Buffer Sizes  =
    44
    5 WARPLab 7.5 for WARP v3 supports sample storage in the board's 2GB DDR3 DRAM. As a result WARPLab 7.5 can be used with much longer waveforms than previous releases, which were limited to the FPGA's on-chip BRAM.
     5WARPLab 7.5 for WARP v3 supports sample storage in the board's 2GB DDR3 DRAM. As a result WARPLab 7.5 can be used with much longer waveforms than previous releases, which were limited to the FPGA's on-chip BRAM.  Unfortunately, due to hardware limitations, WARP v2 can only support the same number of samples as previous WARPLab versions.
    66
    77The table below summarizes the maximum Tx and Rx waveform lengths for WARP v3.