Changes between Version 11 and Version 12 of WARPLab/QuickStart


Ignore:
Timestamp:
Mar 9, 2013, 2:38:03 PM (11 years ago)
Author:
murphpo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WARPLab/QuickStart

    v11 v12  
    2525  1. Connect ETH_A to a 1Gb Ethernet switch
    2626  1. Set the user DIP switch to a unique value on each node, starting at 0
    27   1. Configure the FPGA with the reference design. The reference bitstreams are included in the Reference_Bitstreams folder. Unzip {{{download.zip}}} to find {{{download.bit}}} and {{{download.bin}}} (see the [wiki:howto/SD_Config SD config howto for help using the .bin file).
     27  1. Configure the FPGA with the reference design. The reference bitstreams are included in the Reference_Bitstreams folder. Unzip {{{download.zip}}} to find {{{download.bit}}} and {{{download.bin}}} (see the [wiki:howto/SD_Config SD config howto] for help using the .bin file).
    2828   1. On boot each node will display its node ID on the right hex display
    2929   1. The bottom green LED will blink until the Ethernet link is up