Changes between Version 28 and Version 29 of WARPLab6/GettingStarted
- Timestamp:
- Feb 27, 2013, 9:16:10 AM (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
WARPLab6/GettingStarted
v28 v29 32 32 WARP v3 users can use the [wiki:HardwareUsersGuides/CM-MMCX CM-MMCX] clock module to share sampling and/or RF clocks between multiple WARP v3 kits. 33 33 34 ||[[Image(CM-MMCXSwitch.jpg,width=400,link=[attachment: MMCXSwitch.jpg])]]||35 || '''[attachment: MMCXSwitch.jpg CM-MMCX Configuration (Enlarge Image)]''' ||34 ||[[Image(CM-MMCXSwitch.jpg,width=400,link=[attachment:CM-MMCXSwitch.jpg])]]|| 35 || '''[attachment:CM-MMCXSwitch.jpg CM-MMCX Configuration (Enlarge Image)]''' || 36 36 37 37 The SIP switches on the CM-MMCX board are used to configure the board into a number of different states (shown in the above diagram). For example, the switches can be used to configure the board to act as a host of sample and RF clocks by enabling the MMCX clock outputs on the board. Using MMCX cables to connect this host board to a different WARP v3 node with the CM-MMCX that is configured for off-board clocking allows clocks to be shared.
