Changes between Version 7 and Version 8 of WARPLab6/GettingStarted
- Timestamp:
- Sep 30, 2009, 5:05:17 PM (15 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
WARPLab6/GettingStarted
v7 v8 14 14 15 15 6. Set the DIP switches on the two WARP boards to zero (0000) and one (0001). 16 [[Image(OFDMReferenceDesign/Files: setup_05a.jpg)]]16 [[Image(OFDMReferenceDesign/Files:DIP_switches.jpg)]] 17 17 18 18 7. Download the WARPLab bitstream to both boards. The latest WARPLab bitstream is available [wiki:WARPLab/Releases here]. The bitstream can be downloaded either via an external JTAG cable, via a USB cable (connected to the FPGA board's USB port) or a CompactFlash card. Instructions on formatting and loading systems on to a Compact Flash are available [wiki:sysace/formatload#FormattingandLoadingSystemsontoaCompactFlash here]. After downloading the bitstreams, the right hex display on the WARP boards should show a single digit 1 for the board with DIP switch set to zero and a single digit 2 for the board with DIP switch set to one. This digit is the last octet of the board's IP address (10.0.0.1 or 10.0.0.2).