wiki:Workshops/newOulu_2007July

WARP Workshop at University of Oulu

July 10-11, 2007



           

Thank you for your interest in the WARP Workshop at University of Oulu. This page will provide you with information about the location of the workshop and workshop content.


Workshop Description

The University of Oulu WARP Workshop introduces attendees to the Rice WARP development platform, including the hardware and software tools used to develop and implement designs in WARP. Attendees will learn the complete WARP design flow, from specification of initial design parameters through implementation of designs on WARP hardware.


Workshop Materials

Course Outline

DAY 1
- 9am-4pm

  • Overview : WARP Hardware and Design Environment

    Attendees will learn about the hardware-level capabilities of WARP and the system-level design flow. A brief presentation will be followed by a lab exercise where attendees will use the design tools to implement a simple hardware co-processor on the FPGA.

  • Implementation of Physical Layer Protocols
    Classical physical layer algorithms such as orthogonal frequency division multiplexing (OFDM) will be presented in the context of physical layer design for WARP. Following the presentation, attendees will use the design tools learned in the previous exercise to generate base-band waveforms on the FPGA and upconvert them to RF using the WARP radio boards.

    DAY 2 - 9am-4pm

  • Implementation of Network Protocols

    Networking protocols will be discussed in the context of design realization and at-scale experimentation on WARP. Specifically, the medium access control (MAC) layer will be the focus. Using WARP's medium access framework, attendees will implement a simplified ALOHA protocol and demonstrate its capabilities with real-world traffic from a PC.

    Helpful Material: Medium Access Overview and knowledge of C programming.



  • Attendees will utilize MATLAB, Simulink, and Xilinx Platform Studio throughout this two-day workshop. Familiarity with Xilinx development tools, specifically Xilinx Platform Studio, is helpful but not required. Familiarity with MATLAB is required. Development stations, including all required computer hardware and software, will be provided.

    Additional tutorials and references can be found at:

    Workshop Location

    The workshops will be held in the labs in CWC at the University of Oulu. Specific room numbers will be determined soon.


    Last modified 12 years ago Last modified on Oct 13, 2007, 2:23:19 AM