Changes between Version 4 and Version 5 of howto/connectclocks

Timestamp:

Sep 26, 2012, 4:56:46 PM (12 years ago)

Author:

chunter

Comment:

--

howto/connectclocks

@@ -47 +47 @@
 == Sample Clocking ==
 
-The cables used for the sampling clock are the green and white twisted pair cables that are roughly 3.25 inches long. These clock the ADCs and the DACs on the radio, and their orientation is important. The figure at the right shows the visual representation of how they should be connected. The following table provides details.
-
-||= =||= '''Connector Reference''' =||
-|| Radio Slot 1 || Radio J13 → Clock J7 ||
-|| Radio Slot 2 || Radio J13 → Clock J13 ||
-|| Radio Slot 3 || Radio J13 → Clock J9 ||
-|| Radio Slot 4 || Radio J13 → Clock J8 ||
-
-Note: the lengths of the sampling clock cables must be matched.
-
 {{{
 #!html
@@ -77 +67 @@
 </td></tr></table>
 }}}
+
+
+The cables used for the sampling clock are the green and white twisted pair cables that are roughly 3.25 inches long. These clock the ADCs and the DACs on the radio, and their orientation is important. The figure at the right shows the visual representation of how they should be connected. The following table provides details.
+
+||= =||= '''Connector Reference''' =||
+|| Radio Slot 1 || Radio J13 → Clock J7 ||
+|| Radio Slot 2 || Radio J13 → Clock J13 ||
+|| Radio Slot 3 || Radio J13 → Clock J9 ||
+|| Radio Slot 4 || Radio J13 → Clock J8 ||
+
+Note: the lengths of the sampling clock cables must be matched.