3 | 3 | '''Any''' system (not the case for software reconfiguration) can be reconfigured using the WARP’s SystemACE controller configuration control switches. Hardware reconfiguration utilizes the dipswitch box sitting above the flash-reader on WARP. '''Note:''' there are 4 switches. 3 of the 4 switches are used to select the configuration address (in binary). The last switch, is '''inverted''', and is used for selecting whether the reconfiguration is done in hardware or software. This switch simply locks the '''hardware reconfiguration pushbutton''' (also next to the SysACE configuration dip-switches) from being used. The WARP PCB has a small graphic next to the dipswitches, detailing which direction == 1, and which direction == 0. Hardware reconfiguration is as follows: |