WARP Project Forums - Wireless Open-Access Research Platform

Hi,

   When I try to program the WARP v3 board with WARPLab reference design in terminal I get the following error

WARPLab v7.5.1 (compiled Jun  9 2015 10:48:44)
Configured for 2 RF Interfaces - Using WARP v3 on-board RF interfaces
No clock module detected - selecting on-board clocks
NODE: W3-a-00548 using Node ID: 1
DRAM SODIMM detected ...
  Contents not cleared
Radios didn't lock! RC stat reg: 0x00001810
IFC: ERROR (wl_interface.c:337): Radio controller initialization failed with status: -1
NODE: ERROR (wl_node.c:250): Interface initialization error! Exiting...
NODE: ERROR (wl_node.c:379): Error in global_initialize()! Exiting...
--------------------------------------------------------------------------------------
both the LED of RF A is continuously blinking and LED display have the value E2.All other board working fine.


what is this error ,is it some damage of the Radio controller.

Thanks,
Kanchan

Last edited by kanchan (2015-Jun-09 04:54:05)