WARP Project Forums - Wireless Open-Access Research Platform

You are not logged in.

#1 2020-Jun-15 05:48:48

Lavender
Member
Registered: 2020-Apr-07
Posts: 20

How to send RTS and CTS information

How to send RTS and CTS information to reserve channel in WARP.

Thanks.

Offline

 

#2 2020-Jun-17 21:04:25

murphpo
Administrator
From: Mango Communications
Registered: 2006-Jul-03
Posts: 5159

Re: How to send RTS and CTS information

Your previous questions have related to the WARPLab Reference Design, where RTS/CTS/channel reservation don't make sense. Are you now working with the 802.11 Reference Design? If so, RTS Tx is controlled by the RTS threshold (the max packet length before which RTS are transmitted automatically by the DCF. CTS transmission is implemented in the DCF in response to any RTS receptions.

Offline

 

#3 2020-Jun-19 08:55:32

Lavender
Member
Registered: 2020-Apr-07
Posts: 20

Re: How to send RTS and CTS information

I am using 802.11 Reference Design.

If I need to send OFDM signal on channel 6, before sending OFDM signal, I need to coordinate with other WiFi devices to reserve channel 6.
But from the sample code, I did not find the M-code to send RTS and CTS. Could you please provide some suggestions for me to find the M-code, thanks.

Offline

 

Board footer