WARP Project Forums - Wireless Open-Access Research Platform

You are not logged in.

  • Index
  •  » WARP Hardware
  •  » Adding external clock source to get 3.5GHz RF out from antenna

#1 2019-Oct-15 06:47:04

Surya
Member
Registered: 2015-Feb-02
Posts: 3

Adding external clock source to get 3.5GHz RF out from antenna

I am using WARP V1 and I have been able to generate signals through WARPLab.

I have a new challenge, Instead of only ISM band I want to generate a signal at 3.5GHz and my base band signal would have 18MHz bandwidth. Is that possible generate the 3.5GHz RF signal? Do we have any provision to give external signal so that we can get the required RF signal at 3.5GHz?

Please do help me.

Thanks
Surya

Offline

 

#2 2019-Oct-15 09:57:50

murphpo
Administrator
From: Mango Communications
Registered: 2006-Jul-03
Posts: 5104

Re: Adding external clock source to get 3.5GHz RF out from antenna

No - all WARP hardware uses the MAX2829 RF transceiver which only supports the 2.4 and 5GHz bands.

Offline

 
  • Index
  •  » WARP Hardware
  •  » Adding external clock source to get 3.5GHz RF out from antenna

Board footer