[1927] | 1 | //---------------------------------------------------------------------------- |
---|
| 2 | // user_logic.v - module |
---|
| 3 | //---------------------------------------------------------------------------- |
---|
| 4 | // |
---|
| 5 | // *************************************************************************** |
---|
| 6 | // ** Copyright (c) 1995-2012 Xilinx, Inc. All rights reserved. ** |
---|
| 7 | // ** ** |
---|
| 8 | // ** Xilinx, Inc. ** |
---|
| 9 | // ** XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" ** |
---|
| 10 | // ** AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND ** |
---|
| 11 | // ** SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, ** |
---|
| 12 | // ** OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, ** |
---|
| 13 | // ** APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION ** |
---|
| 14 | // ** THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, ** |
---|
| 15 | // ** AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE ** |
---|
| 16 | // ** FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY ** |
---|
| 17 | // ** WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE ** |
---|
| 18 | // ** IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR ** |
---|
| 19 | // ** REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF ** |
---|
| 20 | // ** INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ** |
---|
| 21 | // ** FOR A PARTICULAR PURPOSE. ** |
---|
| 22 | // ** ** |
---|
| 23 | // *************************************************************************** |
---|
| 24 | // |
---|
| 25 | //---------------------------------------------------------------------------- |
---|
| 26 | // Filename: user_logic.v |
---|
[5565] | 27 | // Version: 1.03.a |
---|
[1927] | 28 | // Description: User logic module. |
---|
| 29 | // Date: Fri Nov 09 20:37:15 2012 (by Create and Import Peripheral Wizard) |
---|
| 30 | // Verilog Standard: Verilog-2001 |
---|
| 31 | //---------------------------------------------------------------------------- |
---|
| 32 | // Naming Conventions: |
---|
| 33 | // active low signals: "*_n" |
---|
| 34 | // clock signals: "clk", "clk_div#", "clk_#x" |
---|
| 35 | // reset signals: "rst", "rst_n" |
---|
| 36 | // generics: "C_*" |
---|
| 37 | // user defined types: "*_TYPE" |
---|
| 38 | // state machine next state: "*_ns" |
---|
| 39 | // state machine current state: "*_cs" |
---|
| 40 | // combinatorial signals: "*_com" |
---|
| 41 | // pipelined or register delay signals: "*_d#" |
---|
| 42 | // counter signals: "*cnt*" |
---|
| 43 | // clock enable signals: "*_ce" |
---|
| 44 | // internal version of output port: "*_i" |
---|
| 45 | // device pins: "*_pin" |
---|
| 46 | // ports: "- Names begin with Uppercase" |
---|
| 47 | // processes: "*_PROCESS" |
---|
| 48 | // component instantiations: "<ENTITY_>I_<#|FUNC>" |
---|
| 49 | //---------------------------------------------------------------------------- |
---|
| 50 | |
---|
| 51 | `uselib lib=unisims_ver |
---|
| 52 | `uselib lib=proc_common_v3_00_a |
---|
| 53 | |
---|
| 54 | module user_logic |
---|
| 55 | ( |
---|
| 56 | // -- ADD USER PORTS BELOW THIS LINE --------------- |
---|
[2825] | 57 | //I/O tied to top-level pins, connected to devices on board |
---|
[3693] | 58 | output [6:0] hexdisp_left, |
---|
| 59 | output hexdisp_left_dp, |
---|
| 60 | output [6:0] hexdisp_right, |
---|
| 61 | output hexdisp_right_dp, |
---|
[2825] | 62 | |
---|
| 63 | output [3:0] leds_red, |
---|
| 64 | output [3:0] leds_green, |
---|
| 65 | output rfa_led_red, |
---|
| 66 | output rfa_led_green, |
---|
| 67 | output rfb_led_red, |
---|
| 68 | output rfb_led_green, |
---|
| 69 | |
---|
| 70 | input [3:0] dipsw, |
---|
| 71 | input pb_u, |
---|
| 72 | input pb_m, |
---|
| 73 | input pb_d, |
---|
[5537] | 74 | |
---|
[5565] | 75 | input [15:0] usr_dbg_hdr_out, //on-chip signals driven out to debug header pins |
---|
| 76 | output [15:0] usr_dbg_hdr_in, //debug header pins driven to on-chip signals |
---|
| 77 | inout [15:0] dbg_hdr, //top-level IOBs for debug header pins |
---|
[2825] | 78 | |
---|
| 79 | //I/O optionally connected to internal signals for non-software access to user I/O |
---|
| 80 | input [6:0] usr_hexdisp_left, |
---|
| 81 | input usr_hexdisp_left_dp, |
---|
| 82 | input [6:0] usr_hexdisp_right, |
---|
| 83 | input usr_hexdisp_right_dp, |
---|
| 84 | |
---|
| 85 | input [3:0] usr_leds_red, |
---|
| 86 | input [3:0] usr_leds_green, |
---|
| 87 | |
---|
| 88 | input usr_rfa_led_red, |
---|
| 89 | input usr_rfa_led_green, |
---|
| 90 | input usr_rfb_led_red, |
---|
| 91 | input usr_rfb_led_green, |
---|
| 92 | |
---|
| 93 | output [3:0] usr_dipsw, |
---|
| 94 | output usr_pb_u, |
---|
| 95 | output usr_pb_m, |
---|
| 96 | output usr_pb_d, |
---|
| 97 | |
---|
| 98 | //Clock signal for DNA_PORT.CLK port (must be <100MHz) |
---|
| 99 | input DNA_Port_Clk, |
---|
[1927] | 100 | // -- ADD USER PORTS ABOVE THIS LINE --------------- |
---|
| 101 | |
---|
| 102 | // -- DO NOT EDIT BELOW THIS LINE ------------------ |
---|
| 103 | // -- Bus protocol ports, do not add to or delete |
---|
[2825] | 104 | input Bus2IP_Clk, |
---|
| 105 | input Bus2IP_Resetn, |
---|
| 106 | input [C_SLV_DWIDTH-1 : 0] Bus2IP_Data, |
---|
| 107 | input [C_SLV_DWIDTH/8-1 : 0] Bus2IP_BE, |
---|
| 108 | input [C_NUM_REG-1 : 0] Bus2IP_RdCE, |
---|
| 109 | input [C_NUM_REG-1 : 0] Bus2IP_WrCE, |
---|
| 110 | output [C_SLV_DWIDTH-1 : 0] IP2Bus_Data, |
---|
| 111 | output IP2Bus_RdAck, |
---|
| 112 | output IP2Bus_WrAck, |
---|
| 113 | output IP2Bus_Error |
---|
[1927] | 114 | // -- DO NOT EDIT ABOVE THIS LINE ------------------ |
---|
| 115 | ); // user_logic |
---|
| 116 | |
---|
| 117 | // -- ADD USER PARAMETERS BELOW THIS LINE ------------ |
---|
| 118 | parameter HEXDISP_ACTIVE_HIGH = 0; |
---|
| 119 | parameter INCLUDE_DNA_READ_LOGIC = 1; |
---|
| 120 | // -- ADD USER PARAMETERS ABOVE THIS LINE ------------ |
---|
| 121 | |
---|
| 122 | // -- DO NOT EDIT BELOW THIS LINE -------------------- |
---|
| 123 | // -- Bus protocol parameters, do not add to or delete |
---|
[5565] | 124 | parameter C_NUM_REG = 15; |
---|
[1927] | 125 | parameter C_SLV_DWIDTH = 32; |
---|
| 126 | // -- DO NOT EDIT ABOVE THIS LINE -------------------- |
---|
| 127 | |
---|
| 128 | //---------------------------------------------------------------------------- |
---|
| 129 | // Implementation |
---|
| 130 | //---------------------------------------------------------------------------- |
---|
| 131 | |
---|
| 132 | // --USER nets declarations added here, as needed for user logic |
---|
| 133 | |
---|
| 134 | // Nets for user logic slave model s/w accessible register example |
---|
| 135 | reg [C_SLV_DWIDTH-1 : 0] slv_reg0; |
---|
| 136 | reg [C_SLV_DWIDTH-1 : 0] slv_reg1; |
---|
| 137 | reg [C_SLV_DWIDTH-1 : 0] slv_reg2; |
---|
| 138 | reg [C_SLV_DWIDTH-1 : 0] slv_reg3; |
---|
| 139 | reg [C_SLV_DWIDTH-1 : 0] slv_reg4; |
---|
| 140 | reg [C_SLV_DWIDTH-1 : 0] slv_reg5; |
---|
| 141 | reg [C_SLV_DWIDTH-1 : 0] slv_reg6; |
---|
| 142 | reg [C_SLV_DWIDTH-1 : 0] slv_reg7; |
---|
| 143 | reg [C_SLV_DWIDTH-1 : 0] slv_reg8; |
---|
| 144 | reg [C_SLV_DWIDTH-1 : 0] slv_reg9; |
---|
| 145 | reg [C_SLV_DWIDTH-1 : 0] slv_reg10; |
---|
| 146 | reg [C_SLV_DWIDTH-1 : 0] slv_reg11; |
---|
[2825] | 147 | reg [C_SLV_DWIDTH-1 : 0] slv_reg12; |
---|
[5537] | 148 | reg [C_SLV_DWIDTH-1 : 0] slv_reg13; |
---|
[5565] | 149 | reg [C_SLV_DWIDTH-1 : 0] slv_reg14; |
---|
| 150 | wire [14 : 0] slv_reg_write_sel; |
---|
| 151 | wire [14 : 0] slv_reg_read_sel; |
---|
[1927] | 152 | reg [C_SLV_DWIDTH-1 : 0] slv_ip2bus_data; |
---|
| 153 | wire slv_read_ack; |
---|
| 154 | wire slv_write_ack; |
---|
| 155 | integer byte_index, bit_index; |
---|
| 156 | |
---|
| 157 | // USER logic implementation added here |
---|
| 158 | |
---|
| 159 | // ------------------------------------------------------ |
---|
| 160 | // Example code to read/write user logic slave model s/w accessible registers |
---|
| 161 | // |
---|
| 162 | // Note: |
---|
| 163 | // The example code presented here is to show you one way of reading/writing |
---|
| 164 | // software accessible registers implemented in the user logic slave model. |
---|
| 165 | // Each bit of the Bus2IP_WrCE/Bus2IP_RdCE signals is configured to correspond |
---|
| 166 | // to one software accessible register by the top level template. For example, |
---|
| 167 | // if you have four 32 bit software accessible registers in the user logic, |
---|
| 168 | // you are basically operating on the following memory mapped registers: |
---|
| 169 | // |
---|
| 170 | // Bus2IP_WrCE/Bus2IP_RdCE Memory Mapped Register |
---|
| 171 | // "1000" C_BASEADDR + 0x0 |
---|
| 172 | // "0100" C_BASEADDR + 0x4 |
---|
| 173 | // "0010" C_BASEADDR + 0x8 |
---|
| 174 | // "0001" C_BASEADDR + 0xC |
---|
| 175 | // |
---|
| 176 | // ------------------------------------------------------ |
---|
| 177 | |
---|
| 178 | assign |
---|
[5565] | 179 | slv_reg_write_sel = Bus2IP_WrCE[14:0], |
---|
| 180 | slv_reg_read_sel = Bus2IP_RdCE[14:0], |
---|
| 181 | slv_write_ack = Bus2IP_WrCE[0] || Bus2IP_WrCE[1] || Bus2IP_WrCE[2] || Bus2IP_WrCE[3] || Bus2IP_WrCE[4] || Bus2IP_WrCE[5] || Bus2IP_WrCE[6] || Bus2IP_WrCE[7] || Bus2IP_WrCE[8] || Bus2IP_WrCE[9] || Bus2IP_WrCE[10] || Bus2IP_WrCE[11] || Bus2IP_WrCE[12] || Bus2IP_WrCE[13] || Bus2IP_WrCE[14], |
---|
| 182 | slv_read_ack = Bus2IP_RdCE[0] || Bus2IP_RdCE[1] || Bus2IP_RdCE[2] || Bus2IP_RdCE[3] || Bus2IP_RdCE[4] || Bus2IP_RdCE[5] || Bus2IP_RdCE[6] || Bus2IP_RdCE[7] || Bus2IP_RdCE[8] || Bus2IP_RdCE[9] || Bus2IP_RdCE[10] || Bus2IP_RdCE[11] || Bus2IP_RdCE[12] || Bus2IP_RdCE[13] || Bus2IP_RdCE[14]; |
---|
[1927] | 183 | |
---|
| 184 | // implement slave model register(s) |
---|
| 185 | always @( posedge Bus2IP_Clk ) |
---|
| 186 | begin |
---|
| 187 | |
---|
| 188 | if ( Bus2IP_Resetn == 1'b0 ) |
---|
| 189 | begin |
---|
| 190 | slv_reg0 <= 32'h3F000000; //Defaults: hex map mode on for both displays, RF LEDs controlled by usr_ ports |
---|
| 191 | slv_reg1 <= 0; |
---|
| 192 | slv_reg2 <= 0; |
---|
| 193 | slv_reg3 <= 0; |
---|
| 194 | slv_reg4 <= 0; |
---|
| 195 | slv_reg5 <= 0; |
---|
| 196 | slv_reg6 <= 0; |
---|
| 197 | slv_reg7 <= 0; |
---|
| 198 | slv_reg8 <= 0; |
---|
| 199 | slv_reg9 <= 0; |
---|
| 200 | slv_reg10 <= 0; |
---|
| 201 | slv_reg11 <= 0; |
---|
[2825] | 202 | slv_reg12 <= 0; |
---|
[5537] | 203 | slv_reg13 <= 0; |
---|
[5565] | 204 | slv_reg14 <= 0; |
---|
[1927] | 205 | end |
---|
| 206 | else |
---|
| 207 | case ( slv_reg_write_sel ) |
---|
[5565] | 208 | 15'b100000000000000 : |
---|
[1927] | 209 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 210 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 211 | slv_reg0[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 212 | 15'b010000000000000 : |
---|
[1927] | 213 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 214 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 215 | slv_reg1[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 216 | 15'b001000000000000 : |
---|
[1927] | 217 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 218 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 219 | slv_reg2[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 220 | 15'b000100000000000 : |
---|
[1927] | 221 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 222 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 223 | slv_reg3[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 224 | 15'b000010000000000 : |
---|
[1927] | 225 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 226 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 227 | slv_reg4[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 228 | 15'b000001000000000 : |
---|
[1927] | 229 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 230 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 231 | slv_reg5[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 232 | 15'b000000100000000 : |
---|
[1927] | 233 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 234 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 235 | slv_reg6[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 236 | 15'b000000010000000 : |
---|
[1927] | 237 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 238 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 239 | slv_reg7[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 240 | 15'b000000001000000 : |
---|
[1927] | 241 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 242 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 243 | slv_reg8[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 244 | 15'b000000000100000 : |
---|
[1927] | 245 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 246 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 247 | slv_reg9[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 248 | 15'b000000000010000 : |
---|
[1927] | 249 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 250 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 251 | slv_reg10[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 252 | 15'b000000000001000 : |
---|
[1927] | 253 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 254 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 255 | slv_reg11[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 256 | 15'b000000000000100 : |
---|
[2825] | 257 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 258 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 259 | slv_reg12[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 260 | 15'b000000000000010 : |
---|
[5537] | 261 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 262 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 263 | slv_reg13[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[5565] | 264 | 15'b000000000000001 : |
---|
| 265 | for ( byte_index = 0; byte_index <= (C_SLV_DWIDTH/8)-1; byte_index = byte_index+1 ) |
---|
| 266 | if ( Bus2IP_BE[byte_index] == 1 ) |
---|
| 267 | slv_reg14[(byte_index*8) +: 8] <= Bus2IP_Data[(byte_index*8) +: 8]; |
---|
[1927] | 268 | default : begin |
---|
| 269 | slv_reg0 <= slv_reg0; |
---|
| 270 | slv_reg1 <= slv_reg1; |
---|
| 271 | slv_reg2 <= slv_reg2; |
---|
| 272 | slv_reg3 <= slv_reg3; |
---|
| 273 | slv_reg4 <= slv_reg4; |
---|
| 274 | slv_reg5 <= slv_reg5; |
---|
| 275 | slv_reg6 <= slv_reg6; |
---|
| 276 | slv_reg7 <= slv_reg7; |
---|
| 277 | slv_reg8 <= slv_reg8; |
---|
| 278 | slv_reg9 <= slv_reg9; |
---|
| 279 | slv_reg10 <= slv_reg10; |
---|
| 280 | slv_reg11 <= slv_reg11; |
---|
[2825] | 281 | slv_reg12 <= slv_reg12; |
---|
[5537] | 282 | slv_reg13 <= slv_reg13; |
---|
[5565] | 283 | slv_reg14 <= slv_reg14; |
---|
| 284 | end |
---|
[1927] | 285 | endcase |
---|
| 286 | |
---|
| 287 | end // SLAVE_REG_WRITE_PROC |
---|
| 288 | |
---|
| 289 | wire pb_u_db; |
---|
| 290 | wire pb_m_db; |
---|
| 291 | wire pb_d_db; |
---|
| 292 | wire [3:0] dipsw_db; |
---|
| 293 | reg [56:0] fpga_dna_value = 57'b0; |
---|
| 294 | |
---|
[5537] | 295 | wire [15:0] dbg_hdr_read_val; |
---|
| 296 | |
---|
[1927] | 297 | // implement slave model register read mux |
---|
[2825] | 298 | always @* |
---|
[1927] | 299 | begin |
---|
| 300 | |
---|
| 301 | case ( slv_reg_read_sel ) |
---|
[5565] | 302 | 15'b100000000000000 : slv_ip2bus_data <= slv_reg0; |
---|
| 303 | 15'b010000000000000 : slv_ip2bus_data <= slv_reg1; |
---|
| 304 | 15'b001000000000000 : slv_ip2bus_data <= slv_reg2; |
---|
| 305 | 15'b000100000000000 : slv_ip2bus_data <= slv_reg3; |
---|
| 306 | 15'b000010000000000 : slv_ip2bus_data <= slv_reg4; |
---|
| 307 | 15'b000001000000000 : slv_ip2bus_data <= slv_reg5; |
---|
| 308 | 15'b000000100000000 : slv_ip2bus_data <= {25'b0, pb_u_db, pb_m_db, pb_d_db, dipsw_db}; |
---|
| 309 | 15'b000000010000000 : slv_ip2bus_data <= slv_reg7; |
---|
| 310 | 15'b000000001000000 : slv_ip2bus_data <= slv_reg8; |
---|
| 311 | 15'b000000000100000 : slv_ip2bus_data <= slv_reg9; |
---|
| 312 | 15'b000000000010000 : slv_ip2bus_data <= slv_reg10; |
---|
| 313 | 15'b000000000001000 : slv_ip2bus_data <= fpga_dna_value[56:25];//25:56]; //32 LSB |
---|
| 314 | 15'b000000000000100 : slv_ip2bus_data <= {7'b0, fpga_dna_value[24:0]};//0:24]}; //25 MSB |
---|
| 315 | 15'b000000000000010 : slv_ip2bus_data <= {slv_reg13[31:16], dbg_hdr_read_val}; |
---|
| 316 | 15'b000000000000001 : slv_ip2bus_data <= slv_reg14; |
---|
[1927] | 317 | default : slv_ip2bus_data <= 0; |
---|
| 318 | endcase |
---|
| 319 | |
---|
| 320 | end // SLAVE_REG_READ_PROC |
---|
| 321 | |
---|
| 322 | // ------------------------------------------------------------ |
---|
| 323 | // Example code to drive IP to Bus signals |
---|
| 324 | // ------------------------------------------------------------ |
---|
| 325 | |
---|
| 326 | assign IP2Bus_Data = (slv_read_ack == 1'b1) ? slv_ip2bus_data : 0 ; |
---|
| 327 | assign IP2Bus_WrAck = slv_write_ack; |
---|
| 328 | assign IP2Bus_RdAck = slv_read_ack; |
---|
| 329 | assign IP2Bus_Error = 0; |
---|
| 330 | |
---|
| 331 | //User IO Implementation |
---|
| 332 | /* Address map: |
---|
| 333 | HDL is coded [31:0], adopting Xilinx's convention for AXI IPIF cores |
---|
| 334 | All registers are 32-bits |
---|
| 335 | regX[31] maps to 0x80000000 in C driver |
---|
| 336 | regX[0] maps to 0x00000001 in C driver |
---|
| 337 | |
---|
| 338 | 0: Control RW |
---|
| 339 | [31:30] = Reserved |
---|
| 340 | [ 29] = Left hex data mode (0=user supplies bit-per-segment; 1=user supplies 4-bit hex) 0x20000000 |
---|
| 341 | [ 28] = Right hex data mode (0=user supplies bit-per-segment; 1=user supplies 4-bit hex) 0x10000000 |
---|
| 342 | Control source for LEDs: 0=software controlled, 1=usr_ port controlled |
---|
| 343 | [27:24] = {rfb_red rfb_green rfa_red rfa_green} 0x0F000000 |
---|
| 344 | [23:16] = {leds_red leds_green} 0x00FF0000 |
---|
| 345 | [15: 8] = {hexdisp_left{a b c d e f g dp}} 0x0000FF00 |
---|
| 346 | [ 7: 0] = {hexdisp_right{a b c d e f g dp}} 0x000000FF |
---|
| 347 | 1: Left hex display RW |
---|
| 348 | [31: 9] = reserved |
---|
| 349 | [ 8] = DP (controlled directly; doesn't depend on data mode) 0x100 |
---|
| 350 | [ 6: 0] = Data value ([6:4] ignored when data mode = 1) 0x03F |
---|
| 351 | 2: Right hex display RW |
---|
| 352 | [31: 9] = reserved |
---|
| 353 | [ 8] = DP (controlled directly; doesn't depend on data mode) 0x100 |
---|
| 354 | [ 6: 0] = Data value ([6:4] ignored when data mode = 1) 0x03F |
---|
| 355 | 3: Red user LEDs RW |
---|
| 356 | [31: 4] = reserved |
---|
| 357 | [ 3: 0] = Data value (1=LED illuminated) 0xF, with 0x1 mapped to lowest LED |
---|
| 358 | 4: Green user LEDs RW |
---|
| 359 | [31: 4] = reserved |
---|
| 360 | [ 3: 0] = Data value (1=LED illuminated) 0xF, with 0x1 mapped to lowest LED |
---|
| 361 | 5: RF LEDs RW |
---|
| 362 | [31: 4] = reserved |
---|
| 363 | [ 3] = rfb_red 0x8 |
---|
| 364 | [ 2] = rfb_green 0x4 |
---|
| 365 | [ 1] = rfa_red 0x2 |
---|
| 366 | [ 0] = rfa_green 0x1 |
---|
| 367 | 6: Switch/button inputs RO |
---|
| 368 | [31: 7] = reserved |
---|
| 369 | [ 6] = pb_up 0x40 |
---|
| 370 | [ 5] = pb_mid 0x20 |
---|
| 371 | [ 4] = pb_down 0x10 |
---|
| 372 | [ 3: 0] = DIP switch 0x0F (with 0x1 mapped to right-most switch) |
---|
| 373 | |
---|
[2825] | 374 | 7: PWM Gen Param: PWM period RW |
---|
| 375 | [31:16] = PWN period |
---|
| 376 | [15: 0] = PWM output deassert thresh |
---|
| 377 | |
---|
| 378 | 8: PWM Gen Param: PWM output deassert thresh RW |
---|
| 379 | [31:29] = reserved |
---|
| 380 | [28: 0] = |
---|
| 381 | |
---|
| 382 | 9: PWM Gen Param: PWM ramp step RW |
---|
| 383 | [31] = ramp enabled |
---|
| 384 | [30:16] = pwm_param_ramp_min |
---|
| 385 | [15: 0] = pwm_param_ramp_max |
---|
| 386 | |
---|
| 387 | 10: HW Output control sel RW |
---|
| 388 | [31:28] = Reserved |
---|
| 389 | HW Control source for LEDs: 0=usr_ ports, 1=pwm gen (same ctrlSrc masks as reg0) |
---|
| 390 | [27:24] = {rfb_red rfb_green rfa_red rfa_green} 0x0F000000 |
---|
| 391 | [23:16] = {leds_red leds_green} 0x00FF0000 |
---|
| 392 | [15: 8] = {hexdisp_left{a b c d e f g dp}} 0x0000FF00 |
---|
| 393 | [ 7: 0] = {hexdisp_right{a b c d e f g dp}} 0x000000FF |
---|
| 394 | |
---|
| 395 | 11: FPGA DNA LSB |
---|
| 396 | [31: 0] = 32LSB of FPGA DNA |
---|
| 397 | |
---|
| 398 | 12: FPGA DNA MSB |
---|
| 399 | [31:25] = reserved |
---|
| 400 | [24: 0] = FPGA DNA 25MSB |
---|
| 401 | |
---|
[5537] | 402 | 13: Debug Header IO |
---|
[5565] | 403 | [31:15] = Reserved |
---|
[5537] | 404 | [15: 0] = IOB data. Bits corresponding to inputs contain input values. Bits |
---|
| 405 | corresponding to outputs contain output values. Bits corresponding to |
---|
| 406 | unused pins contain would-be output values (whatever software last wrote). |
---|
[5565] | 407 | 14: Debug Header IO control |
---|
| 408 | [31:16] = IOB direction control, 1 bit per pin; only C_DBG_HDR_WIDTH LSB are used |
---|
| 409 | [15: 0] = Debug header output source select (0=sw via reg13, 1=usr_dbg_hdr_out port) |
---|
| 410 | */ |
---|
[1927] | 411 | integer ii; |
---|
| 412 | |
---|
| 413 | wire [27:0] all_outputs_ctrl_source; |
---|
[2825] | 414 | wire [27:0] all_outputs_hw_ctrl_source; |
---|
[1927] | 415 | wire [27:0] all_outputs_sw_val; |
---|
| 416 | wire [27:0] all_outputs_hw_val; |
---|
| 417 | reg [27:0] all_outputs; |
---|
[2825] | 418 | reg [27:0] all_outputs_d1; |
---|
[1927] | 419 | |
---|
[2825] | 420 | reg [27:0] all_outputs_d2; |
---|
| 421 | |
---|
[1927] | 422 | wire [6:0] leftHex_mapped; |
---|
| 423 | wire [6:0] rightHex_mapped; |
---|
| 424 | |
---|
| 425 | wire [6:0] leftHex_sw_val; |
---|
| 426 | wire [6:0] rightHex_sw_val; |
---|
| 427 | |
---|
| 428 | reg [7:0] pb_u_d = 0; |
---|
| 429 | reg [7:0] pb_m_d = 0; |
---|
| 430 | reg [7:0] pb_d_d = 0; |
---|
| 431 | reg [7:0] dipsw_d0 = 0; |
---|
| 432 | reg [7:0] dipsw_d1 = 0; |
---|
| 433 | reg [7:0] dipsw_d2 = 0; |
---|
| 434 | reg [7:0] dipsw_d3 = 0; |
---|
| 435 | |
---|
[2825] | 436 | |
---|
| 437 | //PWM generator |
---|
| 438 | reg [9:0] pwm_clock_counter = 0; |
---|
| 439 | wire pwm_clock_en; |
---|
| 440 | assign pwm_clock_en = (pwm_clock_counter == 0); |
---|
[1927] | 441 | |
---|
[2825] | 442 | wire [15:0] pwm_param_period; |
---|
| 443 | wire [15:0] pwm_param_thresh_sw; |
---|
| 444 | wire [15:0] pwm_param_thresh; |
---|
| 445 | reg [15:0] pwm_param_thresh_d; |
---|
| 446 | |
---|
| 447 | wire pwm_param_ramp_en; |
---|
| 448 | |
---|
| 449 | wire [14:0] pwm_param_ramp_min; |
---|
| 450 | wire [15:0] pwm_param_ramp_max; |
---|
| 451 | |
---|
| 452 | wire pwm_ramp_count_dir_toggle; |
---|
| 453 | reg pwm_ramp_count_dir_toggle_d = 0; |
---|
| 454 | |
---|
| 455 | reg pwm_ramp_count_dir = 0; |
---|
| 456 | |
---|
| 457 | assign pwm_ramp_count_dir_toggle = (((pwm_ramp_counter > pwm_param_ramp_max) | (pwm_ramp_counter < pwm_param_ramp_min))); |
---|
| 458 | |
---|
| 459 | assign pwm_param_period = slv_reg7[31:16]; |
---|
| 460 | assign pwm_param_thresh_sw = slv_reg7[15:0]; |
---|
| 461 | |
---|
| 462 | assign pwm_param_ramp_en = slv_reg9[31]; |
---|
| 463 | assign pwm_param_ramp_min = slv_reg9[30:16]; |
---|
| 464 | assign pwm_param_ramp_max = slv_reg9[15:0]; |
---|
| 465 | |
---|
| 466 | assign pwm_param_thresh = pwm_param_ramp_en ? pwm_ramp_counter : pwm_param_thresh_sw; |
---|
| 467 | |
---|
| 468 | reg [15:0] pwm_period_counter = 0; |
---|
| 469 | reg [15:0] pwm_ramp_counter = 0; |
---|
| 470 | |
---|
| 471 | reg pwm_out = 0; |
---|
| 472 | |
---|
[5565] | 473 | // Debug header |
---|
| 474 | wire [15:0] dbg_hdr_dir; |
---|
| 475 | wire [15:0] dbg_hdr_src_sel; |
---|
| 476 | |
---|
| 477 | reg [15:0] dbg_hdr_dir_d1; |
---|
| 478 | reg [15:0] dbg_hdr_dir_d2; |
---|
[5537] | 479 | |
---|
[5565] | 480 | reg [15:0] dbg_hdr_src_sel_d1; |
---|
| 481 | reg [15:0] dbg_hdr_src_sel_d2; |
---|
| 482 | |
---|
| 483 | reg [15:0] dbg_hdr_sw_dout_d1; |
---|
| 484 | reg [15:0] dbg_hdr_sw_dout_d2; |
---|
| 485 | reg [15:0] dbg_hdr_hw_dout_d1; |
---|
| 486 | reg [15:0] dbg_hdr_hw_dout_d2; |
---|
| 487 | |
---|
[5537] | 488 | wire [15:0] dbg_hdr_din; |
---|
[5565] | 489 | wire [15:0] dbg_hdr_pin_in; |
---|
| 490 | reg [15:0] dbg_hdr_din_d1; |
---|
| 491 | reg [15:0] dbg_hdr_din_d2; |
---|
[5537] | 492 | |
---|
| 493 | // Debug header logic |
---|
[5565] | 494 | assign dbg_hdr_src_sel = slv_reg14[15:0]; |
---|
| 495 | assign dbg_hdr_dir = slv_reg14[31:16]; |
---|
| 496 | |
---|
| 497 | assign dbg_hdr_read_val = dbg_hdr_din_d2; //software read value |
---|
| 498 | assign usr_dbg_hdr_in = dbg_hdr_read_val; //output to user logic |
---|
[5539] | 499 | |
---|
[5537] | 500 | // Pipeline regs for register bits. These registers reduce timing challenge in routing |
---|
| 501 | // signals between WARP v3 debug header and the shared AXI interconnect data bus |
---|
[2825] | 502 | always @(posedge Bus2IP_Clk) |
---|
| 503 | begin |
---|
[5537] | 504 | dbg_hdr_dir_d1 <= dbg_hdr_dir; |
---|
| 505 | dbg_hdr_dir_d2 <= dbg_hdr_dir_d1; |
---|
[5565] | 506 | |
---|
| 507 | dbg_hdr_src_sel_d1 <= dbg_hdr_src_sel; |
---|
| 508 | dbg_hdr_src_sel_d2 <= dbg_hdr_src_sel_d1; |
---|
[5537] | 509 | |
---|
[5565] | 510 | dbg_hdr_sw_dout_d1 <= slv_reg13[15:0]; |
---|
| 511 | dbg_hdr_sw_dout_d2 <= dbg_hdr_sw_dout_d1; |
---|
| 512 | |
---|
| 513 | dbg_hdr_hw_dout_d1 <= usr_dbg_hdr_out; |
---|
| 514 | dbg_hdr_hw_dout_d2 <= dbg_hdr_hw_dout_d1; |
---|
[5537] | 515 | |
---|
| 516 | dbg_hdr_din_d1 <= dbg_hdr_din; |
---|
| 517 | dbg_hdr_din_d2 <= dbg_hdr_din_d1; |
---|
| 518 | end |
---|
| 519 | |
---|
[5565] | 520 | //Generate array of IOBs for top-level debug header pins |
---|
| 521 | // Each pin has individually controlled IOB |
---|
| 522 | // Tri-state sets direction (software sets tri-state value per pin) |
---|
| 523 | // IOB input (fabric -> pin) driven by hw or sw; source selected by software |
---|
| 524 | // IOB output (pin -> fabric) drives sw register and usr_ output port |
---|
[5537] | 525 | genvar idx; |
---|
| 526 | generate |
---|
[5565] | 527 | for(idx=0; idx<16; idx=idx+1) begin: DBG_HDR_IOBS |
---|
[5537] | 528 | // Treat pin as input if hdr_dir == 1 |
---|
| 529 | // For inputs tri-state IOB (assign output = Z) and capture input in slv_reg13 |
---|
| 530 | // For outputs enable IOB (drive output from slv_reg13), and return output value |
---|
[5539] | 531 | IOBUF iob_dbg_hdr ( |
---|
| 532 | .IO(dbg_hdr[idx]), //Top-level pin |
---|
| 533 | .O(dbg_hdr_pin_in[idx]), //IOB -> Fabric (when IOB is input) |
---|
[5565] | 534 | .I(dbg_hdr_src_sel_d2[idx] ? dbg_hdr_hw_dout_d2[idx] : dbg_hdr_sw_dout_d2[idx]), //Fabric -> IOB (when IOB is output) |
---|
[5539] | 535 | .T(dbg_hdr_dir_d2[idx]) //Tri-state (1=use IOB as input) |
---|
| 536 | ); |
---|
| 537 | |
---|
| 538 | // Software accessible register captures input value for inputs and output value for outputs |
---|
[5565] | 539 | assign dbg_hdr_din[idx] = dbg_hdr_dir_d2[idx] ? dbg_hdr_pin_in[idx] : (dbg_hdr_src_sel_d2[idx] ? dbg_hdr_hw_dout_d2[idx] : dbg_hdr_sw_dout_d2[idx]); |
---|
[5537] | 540 | end |
---|
| 541 | endgenerate |
---|
| 542 | |
---|
| 543 | always @(posedge Bus2IP_Clk) |
---|
| 544 | begin |
---|
[2825] | 545 | pwm_clock_counter <= pwm_clock_counter + 1; |
---|
| 546 | |
---|
| 547 | if(pwm_period_counter >= pwm_param_period) |
---|
| 548 | pwm_period_counter <= 0; |
---|
| 549 | else if(pwm_clock_en) |
---|
| 550 | pwm_period_counter <= pwm_period_counter + 1; |
---|
| 551 | |
---|
| 552 | pwm_param_thresh_d <= pwm_param_thresh; |
---|
| 553 | |
---|
| 554 | pwm_out <= (pwm_period_counter < pwm_param_thresh_d); |
---|
| 555 | end |
---|
| 556 | |
---|
| 557 | always @(posedge Bus2IP_Clk) |
---|
| 558 | begin |
---|
| 559 | pwm_ramp_count_dir_toggle_d <= pwm_ramp_count_dir_toggle; |
---|
| 560 | |
---|
| 561 | //pwm_ramp_count_dir=0 counts up |
---|
| 562 | if(~pwm_param_ramp_en) |
---|
| 563 | pwm_ramp_counter <= {1'b0,pwm_param_ramp_min}; |
---|
| 564 | else if(pwm_clock_en & (pwm_period_counter==0)) |
---|
| 565 | if(pwm_ramp_count_dir) |
---|
| 566 | pwm_ramp_counter <= pwm_ramp_counter + 16'hFFFE; |
---|
| 567 | else |
---|
| 568 | pwm_ramp_counter <= pwm_ramp_counter + 1'b1; |
---|
| 569 | |
---|
| 570 | if(~pwm_param_ramp_en) |
---|
| 571 | pwm_ramp_count_dir <= 0; |
---|
| 572 | else if(pwm_ramp_count_dir_toggle & ~pwm_ramp_count_dir_toggle_d) |
---|
| 573 | pwm_ramp_count_dir <= ~pwm_ramp_count_dir; |
---|
| 574 | |
---|
| 575 | end |
---|
| 576 | |
---|
| 577 | |
---|
[1927] | 578 | //Shift registers for debouncing mechanical inputs |
---|
| 579 | always @(posedge Bus2IP_Clk) |
---|
| 580 | begin |
---|
| 581 | pb_u_d[7:0] <= {pb_u_d[6:0], pb_u}; |
---|
| 582 | pb_m_d[7:0] <= {pb_m_d[6:0], pb_m}; |
---|
| 583 | pb_d_d[7:0] <= {pb_d_d[6:0], pb_d}; |
---|
| 584 | dipsw_d0[7:0] <= {dipsw_d0[6:0], dipsw[0]}; |
---|
| 585 | dipsw_d1[7:0] <= {dipsw_d1[6:0], dipsw[1]}; |
---|
| 586 | dipsw_d2[7:0] <= {dipsw_d2[6:0], dipsw[2]}; |
---|
| 587 | dipsw_d3[7:0] <= {dipsw_d3[6:0], dipsw[3]}; |
---|
| 588 | end |
---|
| 589 | |
---|
| 590 | //Assert debounced signals only if inputs are high 8 consecutive cycles |
---|
| 591 | assign pb_u_db = (pb_u_d == 8'hff); |
---|
| 592 | assign pb_m_db = (pb_m_d == 8'hff); |
---|
| 593 | assign pb_d_db = (pb_d_d == 8'hff); |
---|
| 594 | |
---|
| 595 | //Swap MSB:LSB here, to undo endian swaps relative to schematic labels |
---|
| 596 | assign dipsw_db = {(dipsw_d0==8'hff), (dipsw_d1==8'hff), (dipsw_d2==8'hff), (dipsw_d3==8'hff)}; |
---|
| 597 | |
---|
| 598 | //Logic to map 4-bit hex value to 7-bit value for hex display |
---|
| 599 | sevenSegmentMap leftHexMap (.data(slv_reg1[3:0]), .disp(leftHex_mapped)); |
---|
| 600 | sevenSegmentMap rightHexMap (.data(slv_reg2[3:0]), .disp(rightHex_mapped)); |
---|
| 601 | |
---|
| 602 | //Select which 7-bit value is used as the software-supplied value for hex displays |
---|
| 603 | // User either supplies 4-bit value to be interpretted as hex value |
---|
| 604 | // or raw 7-bit (bit-per-diode) value |
---|
| 605 | assign leftHex_sw_val = slv_reg0[29] ? leftHex_mapped : slv_reg1[6:0]; |
---|
| 606 | assign rightHex_sw_val = slv_reg0[28] ? rightHex_mapped : slv_reg2[6:0]; |
---|
| 607 | |
---|
| 608 | //Extract the mux control values from the software register |
---|
[2825] | 609 | assign all_outputs_ctrl_source = slv_reg0[27:0]; |
---|
| 610 | assign all_outputs_hw_ctrl_source = slv_reg10[27:0]; |
---|
[1927] | 611 | |
---|
| 612 | //Extract and concatenate the software-controlled output values |
---|
| 613 | assign all_outputs_sw_val[27:0] = { |
---|
| 614 | slv_reg5[3], //[27] rgb_red LED |
---|
| 615 | slv_reg5[2], //[26] rgb_green LED |
---|
| 616 | slv_reg5[1], //[25] rga_red LED |
---|
| 617 | slv_reg5[0], //[24] rga_green LED |
---|
| 618 | slv_reg4[3:0], //[23:20] green LEDs |
---|
| 619 | slv_reg3[3:0], //[19:16] red LEDs |
---|
| 620 | slv_reg2[8], //[15] right hex DP |
---|
| 621 | rightHex_sw_val[6:0], //[14:8] right hex mapped |
---|
| 622 | slv_reg1[8], //[7] left hex DP |
---|
| 623 | leftHex_sw_val[6:0] //[6:0] left hex mapped |
---|
| 624 | }; |
---|
| 625 | |
---|
| 626 | //Concatenate the top-level inputs for hardware-controlled output values |
---|
| 627 | assign all_outputs_hw_val[27:24] = {usr_rfb_led_red, usr_rfb_led_green, usr_rfa_led_red, usr_rfa_led_green}; |
---|
| 628 | assign all_outputs_hw_val[23:16] = {usr_leds_green, usr_leds_red}; |
---|
| 629 | assign all_outputs_hw_val[15:8] = {usr_hexdisp_right_dp, usr_hexdisp_right}; |
---|
| 630 | assign all_outputs_hw_val[7:0] = {usr_hexdisp_left_dp, usr_hexdisp_left}; |
---|
| 631 | |
---|
| 632 | //Mux between hardware and software control for each output |
---|
| 633 | // Source control = 0 -> Software register bit controls output |
---|
[2825] | 634 | // Source control = 1 -> Hardware control |
---|
| 635 | // Hardware control mode = 0 -> usr_ port controls |
---|
| 636 | // Hardware control mode = 1 -> pwm module controls |
---|
[1927] | 637 | always @* |
---|
| 638 | begin |
---|
| 639 | for(ii=0; ii<28; ii=ii+1) |
---|
[2825] | 640 | all_outputs[ii] = all_outputs_ctrl_source[ii] ? (all_outputs_hw_ctrl_source[ii] ? pwm_out : all_outputs_hw_val[ii]) : all_outputs_sw_val[ii]; |
---|
[1927] | 641 | end |
---|
| 642 | |
---|
[2825] | 643 | always @(posedge Bus2IP_Clk) |
---|
| 644 | begin |
---|
| 645 | all_outputs_d1 <= all_outputs; |
---|
[3693] | 646 | |
---|
| 647 | // HDL parameter HEXDISP_ACTIVE_HIGH defines the type at build-time |
---|
| 648 | // User values are always interpreted as 1==illuminated |
---|
| 649 | // Mux on active high/low here so _d2 DFFs can be packed into IOBs |
---|
[3700] | 650 | all_outputs_d2[15:0] <= HEXDISP_ACTIVE_HIGH ? all_outputs_d1[15:0] : ~all_outputs_d1[15:0]; |
---|
[3693] | 651 | all_outputs_d2[27:16] <= all_outputs_d1[27:16]; |
---|
[2825] | 652 | end |
---|
| 653 | |
---|
[1927] | 654 | //Map the mux outputs to the top-level outputs |
---|
[2825] | 655 | assign {rfb_led_red, rfb_led_green, rfa_led_red, rfa_led_green} = all_outputs_d2[27:24]; |
---|
[1927] | 656 | |
---|
[2825] | 657 | assign leds_green[3:0] = all_outputs_d2[23:20]; |
---|
| 658 | assign leds_red[3:0] = all_outputs_d2[19:16]; |
---|
[1927] | 659 | |
---|
[3693] | 660 | assign hexdisp_left_dp = all_outputs_d2[7]; |
---|
| 661 | assign hexdisp_left[6:0] = all_outputs_d2[6:0]; |
---|
[1927] | 662 | |
---|
[3693] | 663 | assign hexdisp_right_dp = all_outputs_d2[15]; |
---|
| 664 | assign hexdisp_right[6:0] = all_outputs_d2[14:8]; |
---|
[1927] | 665 | |
---|
| 666 | //Assign the usr_ output ports to the de-bounced top-level inputs |
---|
| 667 | assign usr_dipsw[3:0] = dipsw_db[3:0]; |
---|
| 668 | assign usr_pb_u = pb_u_db; |
---|
| 669 | assign usr_pb_m = pb_m_db; |
---|
| 670 | assign usr_pb_d = pb_d_db; |
---|
| 671 | |
---|
| 672 | generate |
---|
| 673 | if(INCLUDE_DNA_READ_LOGIC) begin |
---|
| 674 | wire dna_port_read, dna_port_shift, dna_port_clk_gated, dna_port_dout; |
---|
| 675 | //Instantiate the DNA_PORT module, for reading the FPGA's unique ID |
---|
| 676 | // Two MSB are always [1 0]? Accordint to isim at least |
---|
| 677 | DNA_PORT #(.SIM_DNA_VALUE(57'h123456789abcdef)) dna_port_inst ( |
---|
| 678 | .DIN(1'b0), |
---|
| 679 | .READ(dna_port_read), |
---|
| 680 | .SHIFT(dna_port_shift), |
---|
| 681 | .CLK(dna_port_clk_gated), |
---|
| 682 | .DOUT(dna_port_dout) |
---|
| 683 | ); |
---|
| 684 | |
---|
| 685 | reg [6:0] dna_read_counter = 7'b0; |
---|
| 686 | |
---|
| 687 | //Only clock the DNA_PORT primitive while actively shifting data out |
---|
| 688 | assign dna_port_clk_gated = (DNA_Port_Clk & (dna_read_counter>7'd60) & (dna_read_counter<7'h7f)); |
---|
| 689 | |
---|
| 690 | //Count-limited counter, that starts at configuration and runs exactly once |
---|
| 691 | always @(posedge DNA_Port_Clk) |
---|
| 692 | begin |
---|
| 693 | if(dna_read_counter == 7'h7f) |
---|
| 694 | dna_read_counter <= 7'h7f; |
---|
| 695 | else |
---|
| 696 | dna_read_counter <= dna_read_counter + 1; |
---|
| 697 | end |
---|
| 698 | |
---|
| 699 | //dna read states, as function of dna_read_counter value: |
---|
| 700 | // 0-63: Do nothing (just in case things needs to settle before DNA_PORT is accessible) |
---|
| 701 | // 64: Toggle READ signal (loads DNA value into DNA_PORT 57-bit shift register) |
---|
| 702 | // 65: Read DNA[0] from shift register DOUT; assert SHIFT |
---|
| 703 | //66-121: Read DNA[1:56] from shif register DOUT; SHIFT stays asserted |
---|
| 704 | // 122: De-assert SHIFT and READ |
---|
| 705 | |
---|
| 706 | assign dna_port_read = (dna_read_counter == 7'd63); |
---|
| 707 | assign dna_port_shift = ((dna_read_counter>= 7'd65) && (dna_read_counter<=122)); |
---|
| 708 | |
---|
| 709 | //Capture the shift register output in a single big register |
---|
| 710 | wire dna_capt; |
---|
| 711 | assign dna_capt = ((dna_read_counter>= 7'd65) && (dna_read_counter<=121)); |
---|
| 712 | always @(posedge DNA_Port_Clk) |
---|
| 713 | begin |
---|
| 714 | if (dna_capt) |
---|
| 715 | fpga_dna_value[dna_read_counter-7'd65] = dna_port_dout; |
---|
| 716 | end |
---|
| 717 | end |
---|
| 718 | endgenerate |
---|
| 719 | |
---|
| 720 | endmodule |
---|
| 721 | |
---|
| 722 | |
---|
| 723 | module sevenSegmentMap |
---|
| 724 | ( |
---|
| 725 | input [3:0] data, |
---|
| 726 | output reg [6:0] disp |
---|
| 727 | ); |
---|
| 728 | |
---|
| 729 | always @(data[3:0]) |
---|
| 730 | case (data[3:0]) |
---|
| 731 | 4'b0000 : disp <= ~(7'b1000000); // 0 |
---|
| 732 | 4'b0001 : disp <= ~(7'b1111001); // 1 |
---|
| 733 | 4'b0010 : disp <= ~(7'b0100100); // 2 |
---|
| 734 | 4'b0011 : disp <= ~(7'b0110000); // 3 |
---|
| 735 | 4'b0100 : disp <= ~(7'b0011001); // 4 |
---|
| 736 | 4'b0101 : disp <= ~(7'b0010010); // 5 |
---|
| 737 | 4'b0110 : disp <= ~(7'b0000010); // 6 |
---|
| 738 | 4'b0111 : disp <= ~(7'b1111000); // 7 |
---|
| 739 | 4'b1000 : disp <= ~(7'b0000000); // 8 |
---|
| 740 | 4'b1001 : disp <= ~(7'b0010000); // 9 |
---|
| 741 | 4'b1010 : disp <= ~(7'b0001000); // A |
---|
| 742 | 4'b1011 : disp <= ~(7'b0000011); // b |
---|
| 743 | 4'b1100 : disp <= ~(7'b1000110); // C |
---|
| 744 | 4'b1101 : disp <= ~(7'b0100001); // d |
---|
| 745 | 4'b1110 : disp <= ~(7'b0000110); // E |
---|
| 746 | 4'b1111 : disp <= ~(7'b0001110); // F |
---|
| 747 | default : disp <= (7'b0000000); |
---|
| 748 | endcase |
---|
| 749 | |
---|
| 750 | endmodule |
---|