Changes between Version 2 and Version 3 of 802.11/Usage/IBSS
- Timestamp:
- Oct 23, 2014, 11:28:00 AM (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
802.11/Usage/IBSS
v2 v3 10 10 == User IO == 11 11 12 '''Hex Displays''': the STA uses the hex displays to show the node's current association ID (AID) as assigned by the AP during the association handshake. The displays will change in real time as the station joins and leaves networks. The displays will show 00 when the STA is not associated with an AP (0 is not a valid AID).12 '''Hex Displays''': the IBSS application uses the hex displays to show the number of peer nodes it currently observes in its IBSS. Nodes can join leave an IBSS at any time, potentially without the knowledge of every other peer in the network. Each IBSS node keeps a list of all the nodes from whom it has received beacon frames indicating IBSS membership. The hex display shows the length of this list. 13 13 14 14 '''DIP Switch''': the IBSS uses the left-most switch to enable or disable active scan and creation of a BSS on boot. When the left switch is up the IBSS will not search for or create a new BSS on boot. The node can still be added to a BSS via wlan_exp commands.