Changes between Version 6 and Version 7 of HardwareUsersGuides/CM-PLL/Connectors
- Timestamp:
- Mar 2, 2015, 8:59:46 PM (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
HardwareUsersGuides/CM-PLL/Connectors
v6 v7 14 14 == MMCX Jack == 15 15 16 The MM ACjack is used to feed a reference clock signal from external equipment, such as test equipment with a 10MHz reference output. This connector is a standard-polarity, standard-gender 50-ohm MMCX jack, also known as a MMCX female connector. The mating cable should have a 50 ohm MMCX plug (male connector).16 The MMCX jack is used to feed a reference clock signal from external equipment, such as test equipment with a 10MHz reference output. This connector is a standard-polarity, standard-gender 50-ohm MMCX jack, also known as a MMCX female connector. The mating cable should have a 50 ohm MMCX plug (male connector). 17 17 18 18 The MMCX jack feeds a simple circuit which converts the single-ended input signal into a differential signal, which then drives one of the inputs of the reference clock mux. The MMCX reference input can be selected with the appropriate [wiki:../Configuration#ReferenceClockSource DIP switch setting].