Changes between Version 8 and Version 9 of HardwareUsersGuides/CM-PLL/Connectors
- Timestamp:
- Mar 2, 2015, 9:02:35 PM (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
HardwareUsersGuides/CM-PLL/Connectors
v8 v9 76 76 The [http://www.samtec.com/technical-specifications/Default.aspx?seriesMaster=sfsd SFSD series cable assemblies] use discrete wires for each signal. These wires are not bound into a single cable, though this is easy to do yourself with tape or zip ties. The compatible part number is '''SFSD-05-28-F-XX.XX-DR-NUS''', where XX.XX is the cable length in decimal inches. 77 77 78 The TFM headers on the CM-PLL are 0.50" pitch, 2x5 pin connectors. These are standard dimensions - there are likely additional cables from Samtec and other manufacturers which are compatible with the CM-PLL headers. If you opt for a different cable, ensure the cable maps signals as specified 78 The TFM headers on the CM-PLL are 0.50" pitch, 2x5 pin connectors. These are standard dimensions - there are likely additional cables from Samtec and other manufacturers which are compatible with the CM-PLL headers. If you opt for a different cable, ensure the cable maps signals as specified above.