Changes between Version 13 and Version 14 of HardwareUsersGuides/FMC-RF-2X245/FMC
- Timestamp:
- Dec 12, 2012, 12:19:08 PM (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
HardwareUsersGuides/FMC-RF-2X245/FMC
v13 v14 64 64 The module dimensions are compliant in the region around the FMC connector. This is sufficient for mechanical compatibility with many FPGA carriers (including WARP v3) which orient their FMC slots with modules extending away from the carrier board. 65 65 66 The FMC-RF-2X245 module deviates from the standard at the other end of the board (near the SMA connectors). The FMC-RF-2X245 module is a simplerectangular PCB, while the FMC standard specifies a more complex shape which narrows at the connector end. This module also extends further from the FMC connector than a compliant module.66 The FMC-RF-2X245 module deviates from the standard at the other end of the board (near the SMA connectors). The FMC-RF-2X245 module is a rectangular PCB, while the FMC standard specifies a more complex shape which narrows at the connector end. This module also extends further from the FMC connector than a compliant module. 67 67 68 68 The deviations from the FMC outline specifications are not an issue when using this module on WARP v3 kits, nor on many other FMC-equipped FPGA development platforms we have seen. However the drawing below and electrical/IO/clocking details above should be carefully considered before using the FMC-RF-2X245 module on a third-party FMC carrier.