Changes between Version 71 and Version 72 of OFDMReferenceDesign/Changelog


Ignore:
Timestamp:
Aug 17, 2010, 8:09:04 PM (14 years ago)
Author:
murphpo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • OFDMReferenceDesign/Changelog

    v71 v72  
    44
    55== OFDM Reference Design v15.0 (2010-Aug-11) ==
    6 The code and models for this design correspond to [source:/@1580 svn rev 1580].
    7 [[BR]]
    8 This project requires at least the latest versions of the 10.1 release of the Xilinx tools (ISE 10.1.03 + IP3, EDK 10.1.03, Sysgen 10.1.3.1386).
     6The code and models for this design correspond to [source:/@1580 svn rev 1580] for the FPGA v1 design and [source:/@1585 svn rev 1585] for the FPGA v2 design.
    97
    10 Download the full XPS project:
     8Note: The PHY is functionally identical for FPGA v1 and v2. The v2 design uses HDL for 10 multipliers (in the Tx scaling and Rx coarse CFO correction blocks) instead of DSP48's. The V2Pro version of the PHY uses too many multipliers for the V4FX100 FPGA, but the V4 FPGA has more than enough logic to realize the extra multiplications in fabric.
     9
     10Download the full XPS projects:
    1111 * Virtex-II Pro (WARP FPGA Board v1.2): [http://warp.rice.edu/bigFiles/OFDM_ReferenceDesign_FPGAv1_public_v15.0.zip OFDM_ReferenceDesign_FPGAv1_public_v15.0.zip] (100MB)
    1212 * Virtex-4 (WARP FPGA Board v2.2): [http://warp.rice.edu/bigFiles/OFDM_ReferenceDesign_FPGAv2_public_v15.0.zip OFDM_ReferenceDesign_FPGAv2_public_v15.0.zip] (100MB)
    1313
    14 Note: The PHY is functionally identical for FPGA v1 and v2. The v2 design uses HDL for 10 multipliers (in the Tx scaling and Rx coarse CFO correction blocks) instead of DSP48's. The V2Pro version of the PHY uses too many multipliers for the V4FX100 FPGA, but the V4 FPGA has more than enough logic to realize the extra multiplications in fabric.
     14Both projects were built using the latest versions of the 10.1 release of the Xilinx tools (ISE 10.1.03 + IP3, EDK 10.1.03, Sysgen 10.1.3.1386).
     15
    1516
    1617'''Hardware Changes'''
    … …  
    2526
    2627'''Software Changes'''
    27  * Added support for the [wiki:WARPnet WARPnet Measurement Framework], including a new top-level application (WARPNET_EXAMPLE)
    28  * Updated warpphy/warpmac to reflect changes to registers in the PHY
     28 * Added support for the [wiki:WARPnet WARPnet Measurement Framework], including a new top-level application (WARPNET_EXAMPLE).
     29 * Updated warpphy/warpmac to reflect changes to registers in the PHY.
    2930
    3031'''Using the Design'''
    31  * Same as v14.0. See below.
     32 * Same as v14.0 (see below).
    3233
    3334----