Changes between Version 9 and Version 10 of OFDMReferenceDesign

Timestamp:

Mar 8, 2007, 6:19:11 PM (17 years ago)

Author:

murphpo

Comment:

--

OFDMReferenceDesign

@@ -10 +10 @@
 One FPGA board '''must''' by configured as Node 0, and other as Node 1, using the on-board dip switches. The switch closest to the power supplies represents the node value. When the program is downloaded, the seven-segment LCDs should show the node values.
 
-Using ethernet, connect one PC to one board, and the other PC to the other board. Note, if the PCs are using older network cards that do not support auto MDI, the user may need to provide crossover ethernet cables instead of standard cables. Once the boards are connected and configures, any traffic directed to one computer's IP address from the other computer will be forwarded.
+Using ethernet, connect one PC to one board, and the other PC to the other board. Note, if the PCs are using older network cards that do not support auto MDI/MDI-X, the user may need to provide crossover ethernet cables instead of standard cables. Once the boards are connected and configures, any traffic directed to one computer's IP address from the other computer will be forwarded.
 
 == Example System Configuration 2 ==