Changes between Version 21 and Version 22 of WARPLab/BufferSizes


Ignore:
Timestamp:
Mar 13, 2015, 3:42:24 PM (9 years ago)
Author:
welsh
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WARPLab/BufferSizes

    v21 v22  
    55WARPLab 7.5 for WARP v3 supports sample storage in the board's 2GB DDR3 DRAM. As a result WARPLab 7.5 can be used with much longer waveforms than previous releases, which were limited to the FPGA's on-chip BRAM.
    66
    7 The table below summarizes the maximum Tx and Rx waveform lengths in WARPLab 7.5 for WARP v3.
     7The table below summarizes the maximum Tx and Rx waveform lengths for WARP v3.
    88
    99||= '''WARPLab Ver''' =||=  '''Tx Samps'''  =||=  '''Tx Time'''  =||=  '''Rx Samps'''  =||=  '''Rx Time'''  =||
    … …  
    1111||  7.5 (4RF)  || 56M || 1.46 sec || 64M || 1.67 sec ||
    1212||  7.4  || 32k || 819.2 µsec || 32k || 819.2 µsec ||
     13
     14
     15The table below summarizes the maximum Tx and Rx waveform lengths for WARP v2.
     16
     17||= '''WARPLab Ver''' =||=  '''Tx Samps'''  =||=  '''Tx Time'''  =||=  '''Rx Samps'''  =||=  '''Rx Time'''  =||
     18||  7.5  || 16k || 409.6 µsec || 16k || 409.6 µsec ||
     19||  7.4  || 16k || 409.6 µsec || 16k || 409.6 µsec ||
    1320
    1421Notes: