[[TracNav(WARPLab/TOC)]]
= WARPLab 7 Example: 8x2 Array =
File: [source:ResearchApps/PHY/WARPLAB/WARPLab7/M_Code_Examples/wl_example_8x2_array.m wl_example_8x2_array.m] 

This example shows how WARPLab can be used for array communications even when the number of antennas exceeds what can be supported on a single WARP board. This example uses two separate WARP boards to act as a single many-antenna transmitter while a third board receives their transmissions.

This example uses 3 nodes:
 * A node that acts as a primary transmitter. This node uses its own on-board clocks for sampling and RF clocking.
 * A node that acts as a secondary transmitter. This node the primary transmitter's clocks as the sources for sampling and RF. Furthermore, the [wiki:.../Reference/TriggerManager Trigger Manager]



[wiki:../nodeSync]


== Setup ==
[[Image(8x2_overview.jpg,width=800)]]

[[Image(8x2_cable_macro.jpg,width=800)]]
[[Image(8x2_cable_micro.jpg,width=800)]]


== Running the Script ==

[[Image(8x2_result.png,width=800)]]