Changes between Version 14 and Version 15 of WARPLab/Porting

Timestamp:

Feb 5, 2015, 10:30:43 AM (9 years ago)

Author:

chunter

Comment:

--

WARPLab/Porting

@@ -93 +93 @@
 % WARPLab 7.5
 
-
 % Set the number of samples that should be captured
 %
@@ -120 +119 @@
 }}}
 
-Without the {{{rx_length}}} command, the board will default to capturing 32 kSamp in WARP v3 hardware and 16 kSamp in WARP v2 hardware. Using this command will explicitly tell the board to capture the given number of samples.
+Without the {{{rx_length}}} command, the board will default to capturing 32 kSamp in WARP v3 hardware and 16 kSamp in WARP v2 hardware. Using this command will explicitly tell the board to capture the given number of samples. Note: the value of {{{rxLength}}} should not exceed the maximum receive buffer size the board can support. To determine this value, use the {{{rx_buff_max_num_samples}}} command.