=== {{{tx_en}}} ===
Enable transmit mode for selected interfaces[[BR]]


'''Arguments:''' none

'''Returns:''' none


=== {{{rx_en}}} ===
Enable receive mode for selected interfaces[[BR]]


'''Arguments:''' none

'''Returns:''' none


=== {{{tx_rx_dis}}} ===
Disable transmita and receive for selected interfaces (standby mode)[[BR]]


'''Arguments:''' none

'''Returns:''' none


=== {{{channel}}} ===
Tune selected interfaces to the specified band and channel[[BR]]


'''Arguments:''' (float BAND, int CHAN)
BAND: Must be 2.4 or 5, to select 2.4GHz or 5GHz channels[[BR]]
CHAN: Must be integer in ![1,11] for BAND=2.4, ![1,23] for BAND=5[[BR]]

'''Returns:''' none

BAND and CHAN must be scalars (same values for all specified interfaces) or[[BR]]
1-D vectors (one value per interface) with length equal to the length of the interface ID vector[[BR]]

Band/Channel - Center Frequency Map:[[BR]]
2.5GHz	   5GHz[[BR]]
Chan Freq  Chan Freq[[BR]]
1    2412	 1    5180[[BR]]
2    2417	 2    5200[[BR]]
3    2422	 3    5220[[BR]]
4    2427	 4    5240[[BR]]
5    2432	 5    5260[[BR]]
6    2437	 6    5280[[BR]]
7    2442	 7    5300[[BR]]
8    2447	 8    5320[[BR]]
9    2452	 9    5500[[BR]]
10   2457	 10   5520[[BR]]
11   2462	 11   5540[[BR]]
12   2467	 12   5560[[BR]]
13   2472	 13   5580[[BR]]
14   2484	 14   5600[[BR]]
15   5620[[BR]]
16   5640[[BR]]
17   5660[[BR]]
18   5680[[BR]]
19   5700[[BR]]
20   5745[[BR]]
21   5765[[BR]]
22   5785[[BR]]
23   5805[[BR]]


=== {{{tx_gains}}} ===
Sets the gains for the variable gain amplifiers in the MAX2829 Tx path[[BR]]
Refer to MAX2829 datasheet for curves of gain value vs actual gain at 2.4 and 5GHz[[BR]]


'''Arguments:''' (int BB_GAIN, int RF_GAIN)
BB_GAIN: Must be integer in ![0,1,2,3] for approx ![-5, -3, -1.5, 0]dB baseband gain[[BR]]
RF_GAIN: Must be integer in ![0:63] for approx ![0:31]dB RF gain[[BR]]

'''Returns:''' none

BB_GAIN and RF_GAIN must be scalars (same values for all specified interfaces) or[[BR]]
1-D vectors (one value per interface) with length equal to the length of the interface ID vector[[BR]]


=== {{{rx_gains}}} ===
Sets the gains for the variable gain amplifiers in the MAX2829 Rx path[[BR]]
Refer to MAX2829 datasheet for curves of gain value vs actual gain at 2.4 and 5GHz[[BR]]


'''Arguments:''' (int BB_GAIN, int RF_GAIN)
BB_GAIN: Must be integer in ![0:31] for approx ![0:63]dB baseband gain[[BR]]
RF_GAIN: Must be integer in ![1,2,3] for approx ![0,15,30]dB RF gain[[BR]]

'''Returns:''' none

BB_GAIN and RF_GAIN must be scalars (same values for all specified interfaces) or[[BR]]
1-D vectors (one value per interface) with length equal to the length of the interface ID vector[[BR]]


=== {{{tx_lpf_corn_freq}}} ===
Sets the corner frequency for the MAX2829 Tx path low pass filter[[BR]]
Refer to MAX2829 datasheet for curves of the frequency response with each setting[[BR]]


'''Arguments:''' (int FILT)
FILT: Must be integer in ![1,2,3] for approx ![12,18,24]MHz corner frequencies (![24,36,48]MHz bandwidths)[[BR]]

'''Returns:''' none

FILT must be scalar (same value for all specified interfaces) or 1-D vector (one value per interface) [[BR]]
with length equal to the length of the interface ID vector[[BR]]


=== {{{rx_lpf_corn_freq}}} ===
Sets the corner frequency for the MAX2829 Rx path low pass filter[[BR]]
Refer to MAX2829 datasheet for curves of the frequency response with each setting[[BR]]


'''Arguments:''' (int FILT)
FILT: Must be integer in ![0,1,2,3] for approx ![7.5,9.5,14,18]MHz corner [[BR]]
frequencies (![15,19,28,36]MHz bandwidths)[[BR]]

'''Returns:''' none

FILT must be scalar (same value for all specified interfaces) or 1-D vector (one value per interface) [[BR]]
with length equal to the length of the interface ID vector[[BR]]


=== {{{rx_gain_mode}}} ===
Sets the gain selection mode[[BR]]


'''Arguments:''' (string MODE)
MODE: 'automatic' for AGC, or 'manual' for manual gain control[[BR]]

'''Returns:''' none