Version 39 (modified by chunter, 12 years ago) (diff) |
---|
WARPLab Revision History
Notes for v6.2
Hardware | Release | Date Posted | ISE Ver | 2 Radio Download | 4 Radio Download |
---|---|---|---|---|---|
WARP v3 | 6.2 | 29-Aug-2012 | 13.4 | w3_WARPLab_v6p2_2rf.bit w3_WARPLab_v6p2_2rf.bin w3_WARPLab_ReferenceDesign_v6p2_2rf.zip | - |
WARP v2 | 6.2 | 2-Sep-2012 | 13.4 | w2_WARPLab_v6p2_2rf.bit w2_WARPLab_v6p2_2rf.ace w2_WARPLab_ReferenceDesign_v6p2_2rf.zip | w2_WARPLab_v6p2_4rf.bit w2_WARPLab_v6p2_4rf.ace w3_WARPLab_ReferenceDesign_v6p2_2rf.zip |
WARP v1 | 6.2 | Coming Soon | 10.1.03 | - | - |
- Added support for WARP v3. In this release, the source models and software for WARPLab are different for WARP v3 than the v1 and v2 hardware. In a future release, these will merge back together to a common code base.
- Added a new WARPLab command to verify network settings from within Matlab. If it even seems like WARPLab isn't working, simply run warplab_networkCheck(N) from the Matlab command line (where N is the number of nodes in your setup). This will run a series of diagnoses to help figure out what the problem is.
- We introduced a bug in the prior 6.1 release that made the processing of sync packets jittery. This has been fixed in this release.
Notes for v6.1
Hardware | Release | Date Posted | ISE Ver | 2 Radio Download | 4 Radio Download |
---|---|---|---|---|---|
WARP v2 | 6.2 | Jul-2012 | 13.4 | w2_WARPLab_v6p2_2rf.bit w2_WARPLab_v6p2_2rf.ace WARPLab_ReferenceDesign_2x2_v06_01_FPGAv2.zip | w2_WARPLab_v6p2_4rf.bit w2_WARPLab_v6p2_4rf.ace w3_WARPLab_ReferenceDesign_v6p2_2rf.zip |
WARP v2 EDK Download: 2 Radio,4 Radio
WARP v1 EDK Download: 2 Radio,4 Radio
- Small, but important, bug fix. MAC addresses for each node were not updated based on dip switch value. This made any setup larger than 1 node fail due to arp table collisions. This has been resolved. v6.0 is deprecated and should not be used
Notes for v6.0 Posted July 2012
WARP v2 EDK Download: 2 Radio,4 Radio
WARP v1 EDK Download: 2 Radio,4 Radio
- Design defaults to using gigabit Ethernet on WARP v2 Hardware (Virtex-4)
- Improved packet handling on WARP v2 for fewer packet drops
- Sync packets now sent as proper broadcast IP frames (X.X.X.255). Manual ARP table entries for sync packets no longer necessary.
- Small change to M-code reference to reduce likelihood of "failed to receive ACK" error.
- Thanks to a modified pnet for Matlab's UDP handling, WARPLab is sped by ~10x
Notes for v5.2 Posted December 2009
WARP v2 EDK Download: 2 Radio,4 Radio
WARP v1 EDK Download: 2 Radio,4 Radio
- Can store RSSI data in the 4x4 design
- Consolidated the Sysgen models. Now there is one Sysgen model, warplab_mimo_4x4.mdl, that implements the full system: 4 radios with I/Q and RSSI buffers. The 2x2 MIMO and 4x4 MIMO Reference Designs? are identical except the 2x2 Design leaves two paths of the model unconnected.
- Minor update: Added the Null MGT wrapper core to the project (see note at the end of the FPGA Board user guide)
Notes for v5.1 Posted November 2009
WARP v2 EDK Download: 2 Radio,4 Radio
WARP v1 EDK Download: 2 Radio,4 Radio
- Builds upon the features of Version 5
- Support for both Version 1 and 2 of the FPGA Board
- Single C-code base for both the 2x2 and 4x4 Reference Designs
- Interoperable across both versions of the FPGA Boards
Notes for v5.0 Posted September 2009
WARP v1 EDK Download: 2 Radio,4 Radio
- Includes Automatic Gain Control (AGC). Previous versions of WARPLab required Manual Gain Control (MGC), the user was required to set receiver gains manually. Now AGC or MGC can be selected by M-code functions.
- RSSI data read is supported by the 2x2 MIMO bitstream but not by the 4x4 MIMO bitstream
- Continuous transmission mode is supported by both the 2x2 and 4x4 bitstreams