Changes between Version 16 and Version 17 of WARPLab6/GettingStarted

Timestamp:

Jun 1, 2011, 8:13:14 AM (13 years ago)

Author:

mduarte

Comment:

Fixing a small typo where it said 'to add Version 5.1' and it has been changed to 'to add Version 5.2'

WARPLab6/GettingStarted

@@ -7 +7 @@
  2. Install Peter Rydesäter's open-source TCP/UDP toolbox for MATLAB (get it free from [http://www.mathworks.com/matlabcentral/fileexchange/345 MATLAB Central]). You may need to re-compile the pnet mex source for your version of Windows/MATLAB. For 64-bit Windows 7, see [http://warp.rice.edu/forums/viewtopic.php?pid=4363#p4363 this forum post].
 
- 3. Download the WARPLab Reference M-code to your PC. The instructions are available [wiki:edk_user_repository here]. In the final step you can choose the appropriate version to add to the path. For example, to add Version 5.1 of the Reference M-Code the path is 'C:\WARP_Repository\ResearchApps\PHY\WARPLAB\WARPLab_v05_2/M_Code_Reference'. Information about the latest version of the WARPLab reference M-Code can be found [wiki:WARPLab/Releases here].
+ 3. Download the WARPLab Reference M-code to your PC. The instructions are available [wiki:edk_user_repository here]. In the final step you can choose the appropriate version to add to the path. For example, to add Version 5.2 of the Reference M-Code the path is 'C:\WARP_Repository\ResearchApps\PHY\WARPLAB\WARPLab_v05_2/M_Code_Reference'. Information about the latest version of the WARPLab reference M-Code can be found [wiki:WARPLab/Releases here].
 
  4. Connect your PC and two WARP boards to a common Ethernet switch. Ideally, nothing else should be connected to the same switch.