Changes between Version 19 and Version 20 of WARPLab6/GettingStarted
- Timestamp:
- Aug 26, 2012, 2:16:13 PM (12 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
WARPLab6/GettingStarted
v19 v20 3 3 = Getting Started = 4 4 5 1. Requirements: At least two WARP nodes, a PC with MATLAB and an Ethernet switch. '''Please note:''' the current WARPLab reference design uses a 100Mb Ethernet link . Users with WARP FPGA v2 (Virtex-4 FPGA) boards will need to use a 100Mb switch to force the FPGA Board Ethernet PHY into 100Mb mode.5 1. Requirements: At least two WARP nodes, a PC with MATLAB and an Ethernet switch. '''Please note:''' the current WARPLab reference design uses a 100Mb Ethernet link for WARP v1 and a 1000Mb Ethernet link for WARP v2/v3. Please use an appropriate speed Ethernet switch with your hardware. 6 6 7 7 2. Install Peter Rydesäter's open-source TCP/UDP toolbox for MATLAB (get it free from [http://www.mathworks.com/matlabcentral/fileexchange/345 MATLAB Central]). You may need to re-compile the pnet mex source for your version of Windows/MATLAB. For 64-bit Windows 7, see [http://warp.rice.edu/forums/viewtopic.php?pid=4363#p4363 this forum post]. 8 8 9 3. Download the WARPLab Reference M-code to your PC. The instructions are available [wiki:edk_user_repository here]. In the final step you can choose the appropriate version to add to the path. For example, to add Version 5.2 of the Reference M-Code the path is 'C:\WARP_Repository\ResearchApps\PHY\WARPLAB\WARPLab_v05_2/M_Code_Reference'. Information about the latest version of the WARPLab reference M-Code can be found [wiki:WARPLab/Releases here].9 3. Download the WARPLab Reference M-code to your PC. The instructions are available [wiki:edk_user_repository here]. In the final step you can choose the appropriate version to add to the path. For example, to add Version 6.1 of the Reference M-Code the path is 'C:\WARP_Repository\ResearchApps\PHY\WARPLAB\WARPLab_v06_1\M_Code_Reference'. Information about the latest version of the WARPLab reference M-Code can be found [wiki:WARPLab/Releases here]. 10 10 11 11 4. Connect your PC and two WARP boards to a common Ethernet switch. Ideally, nothing else should be connected to the same switch.
