Changes between Version 26 and Version 27 of WARPLab6/GettingStarted


Ignore:
Timestamp:
Feb 27, 2013, 9:12:37 AM (11 years ago)
Author:
chunter
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WARPLab6/GettingStarted

    v26 v27  
    3131
    3232WARP v3 users can use the [wiki:HardwareUsersGuides/CM-MMCX CM-MMCX] clock module to share sampling and/or RF clocks between multiple WARP v3 kits.
     33
     34||[[Image(CM-MMCXSwitch.jpg,width=400,link=[attachment:MMCXSwitch.jpg.jpg])]]||
     35||   '''[attachment:MMCXSwitch.jpg.jpg CM-MMCX Configuration (Enlarge Image)]'''  ||
     36
     37Through a combination of WARP platform support cores and software defaults of WARPLab, the SIP switches on the CM-MMCX board are used to configure the board into a number of different states (shown in the above diagram). For example, the switches can be used to configure the board to act as a host of sample and RF clocks by enabling the MMCX clock outputs on the board. Using MMCX cables to connect this host board to another board who is configured for off-board clocking allows clocks to be shared.