Changes between Version 27 and Version 28 of WARPLab6/GettingStarted


Ignore:
Timestamp:
Feb 27, 2013, 9:14:45 AM (11 years ago)
Author:
chunter
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WARPLab6/GettingStarted

    v27 v28  
    3232WARP v3 users can use the [wiki:HardwareUsersGuides/CM-MMCX CM-MMCX] clock module to share sampling and/or RF clocks between multiple WARP v3 kits.
    3333
    34 ||[[Image(CM-MMCXSwitch.jpg,width=400,link=[attachment:MMCXSwitch.jpg.jpg])]]||
    35 ||   '''[attachment:MMCXSwitch.jpg.jpg CM-MMCX Configuration (Enlarge Image)]'''  ||
     34||[[Image(CM-MMCXSwitch.jpg,width=400,link=[attachment:MMCXSwitch.jpg])]]||
     35||   '''[attachment:MMCXSwitch.jpg CM-MMCX Configuration (Enlarge Image)]'''  ||
    3636
    37 Through a combination of WARP platform support cores and software defaults of WARPLab, the SIP switches on the CM-MMCX board are used to configure the board into a number of different states (shown in the above diagram). For example, the switches can be used to configure the board to act as a host of sample and RF clocks by enabling the MMCX clock outputs on the board. Using MMCX cables to connect this host board to another board who is configured for off-board clocking allows clocks to be shared.
     37The SIP switches on the CM-MMCX board are used to configure the board into a number of different states (shown in the above diagram). For example, the switches can be used to configure the board to act as a host of sample and RF clocks by enabling the MMCX clock outputs on the board. Using MMCX cables to connect this host board to a different WARP v3 node with the CM-MMCX that is configured for off-board clocking allows clocks to be shared.