Changes between Version 10 and Version 11 of WARPLab6/Releases


Ignore:
Timestamp:
Nov 12, 2009, 10:33:52 AM (15 years ago)
Author:
sgupta
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WARPLab6/Releases

    v10 v11  
    2323Version 5
    2424 * Posted on September 2009. The WARPLab MIMO 2x2 and 4x4 Reference Designs have been updated to include Automatic Gain Control (AGC). Previous versions of WARPLab required Manual Gain Control (MGC), the user was required to set receiver gains manually. In this new Version 5 release the user can choose between AGC or MGC mode using simple M-Code functions. Two bitstreams are provided, one bitstream to program the boards in the 2x2 MIMO configuration and another bitstream to program the boards in the 4x4 MIMO configuration. AGC and MGC are supported by both bitstreams. Reading of RSSI values is supported by the 2x2 MIMO bitstream but not by the 4x4 MIMO bitstream. Continuous transmission mode is supported by both the 2x2 and 4x4 bitstreams. When the boards are programmed with the 4x4 MIMO bitstream 2x2 MIMO communication is possible but reading of RSSI values is not possible. The WARPLab Reference M-Code functions support both 2x2 and 4x4 MIMO bitstreams. 
    25 
    2625 * WARPLab Version 5 code is available in the links below.
    2726  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_MIMO2x2_MIMO4x4_R05/M_Code_Reference Reference M-Code Version 5].