Changes between Version 35 and Version 36 of WARPLab6/Releases


Ignore:
Timestamp:
Aug 30, 2012, 10:22:11 AM (12 years ago)
Author:
chunter
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WARPLab6/Releases

    v35 v36  
    11[[TracNav(WARPLab/TOC)]]
     2
     3{{{
     4#!div class=important style="border: 1pt solid;"
     5'''Note:''' WARPLab release v6.2 is temporarily only compatible with WARP v3 hardware. We are in the process of porting the changes over to WARP v1 and v2. Users of v1 and v2 hardware should continue to use version 6.1 of WARPLab for the time being. The WARPLab v6.2 reference design for v1 and v2 hardware will be released early next week.
     6}}}
     7
    28
    39= WARPLab Releases =
    … …  
    3238  * Continuous transmission mode is supported by both the 2x2 and 4x4 bitstreams
    3339
     40
     41=== Resources for v6.2 ===
     42
     43 * M-code:
     44  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v6p2/M_Code_Reference Reference M-Code Version 6.2]
     45  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v6p2/M_Code_Examples M-Code examples] that work with version 6.2 of the Reference M-code
     46  * [http://warp.rice.edu/bigFiles/tcp_udp_ip_2.0.6b.zip New TCP/IP Toolbox for Matlab] that is responsible for a ~10x speedup in WARPLab. It is highly recommended to switch to this version of pnet.
     47 * Bitstreams:
     48   * ''.bit files:'' The .bit files are bitstreams that can be downloaded to WARP hardware using Xilix iMPACT.
     49     * [http://warp.rice.edu/dl/refdes/warplab/v6.2/bit/w3_WARPLab_v6p2_2rf.bit w3_WARPLab_v6p2_2rf.bit (WARP v3, 2 Radio)]
     50   * ''.bin files:'' The .bin files are bitstreams that can be loaded onto an SD card for programming a WARP v3 board. For instructions on how to use this .bin, please see our [wiki:howto/SD_Config SD Card Configuration HowTo]
     51     * [http://warp.rice.edu/dl/refdes/warplab/v6.2/bit/w3_WARPLab_v6p2_2rf.bit w3_WARPLab_v6p2_2rf.bit (WARP v3, 2 Radio)]
     52
     53
     54
     55
     56  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v06_1/Bitstreams/WARPLab_2x2_v06_01_FPGAv1.bit 2x2 MIMO bitstream for FPGA Version 1] (Virtex-II Pro)
     57  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v06_1/Bitstreams/WARPLab_4x4_v06_01_FPGAv1.bit 4x4 MIMO bitstream for FPGA Version 1] (Virtex-II Pro)
     58  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v06_1/Bitstreams/WARPLab_2x2_v06_01_FPGAv2.bit 2x2 MIMO bitstream for FPGA Version 2] (Virtex-4)
     59  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v06_1/Bitstreams/WARPLab_4x4_v06_01_FPGAv2.bit 4x4 MIMO bitstream for FPGA Version 2] (Virtex-4)
     60  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v06_1/ACE_Files/ ACE Files] -- [wiki:SystemACE Working with ACE files] ({{{_FPGAv1}}} is for Virtex-II Pro and {{{_FPGAv2}}} is for Virtex-4)
     61 * Reference Design:
     62  * The XPS Reference Designs used to generate the 2x2 and 4x4 MIMO bitstreams that work with Version 6.1 of the Reference M-Code are available [wiki:WARPLab/RefDesign here]
     63 
     64
     65
    3466=== Resources for v6.1 ===
    3567