[[TracNav(WARPLab/TOC)]]

= WARPLab Releases =

== Latest WARPLab Release ==

WARPLab '''Version 5.2''' is the latest WARPLab release and includes support for the [wiki:HardwareUsersGuides/FPGABoard_v2.2 Virtex-4 FPGA Board].

 * '''Notes for v5.2'''
  * Posted December 2009
  * Can now store RSSI data even in the 4x4 design
  * Consolidated the Sysgen models. Now there is one Sysgen model, {{{warplab_mimo_4x4.mdl}}}, that implements the full system: 4 radios with I/Q and RSSI buffers. The 2x2 reference design does not connect the paths for radios in slot 1 and slot 4 but is otherwise identical to the 4x4 design.
 * '''Notes for v5.1'''
  * Posted November 2009
  * Builds upon the features of Version 5
  * Support for both Version 1 and 2 of the FPGA Board
  * Single C-code base for both the 2x2 and 4x4 Reference Designs
  * Interoperable across both versions of the FPGA Boards
 * '''Notes for v5.0'''
  * Posted September 2009
  * Includes Automatic Gain Control (AGC). Previous versions of WARPLab required Manual Gain Control (MGC), the user was required to set receiver gains manually. Now AGC or MGC can be selected by M-code functions.
  * RSSI data read is supported by the 2x2 MIMO bitstream but not by the 4x4 MIMO bitstream
  * Continuous transmission mode is supported by both the 2x2 and 4x4 bitstreams

=== Resources ===

 * M-code:
  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v05_2/M_Code_Reference Reference M-Code Version 5.2].
  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v05_2/M_Code_Examples M-Code examples] that work with version 5.2 of the Reference M code.
 * Bitstreams:
  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v05_2/Bitstreams/WARPLab_2x2_v05_02_FPGAv1.bit 2x2 MIMO bitstream for FPGA Version 1].
  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v05_2/Bitstreams/WARPLab_4x4_v05_02_FPGAv1.bit 4x4 MIMO bitstream for FPGA Version 1].
  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v05_2/Bitstreams/WARPLab_2x2_v05_02_FPGAv2.bit 2x2 MIMO bitstream for FPGA Version 2].
  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v05_2/Bitstreams/WARPLab_4x4_v05_02_FPGAv2.bit 4x4 MIMO bitstream for FPGA Version 2].
  * [source:/ResearchApps/PHY/WARPLAB/WARPLab_v05_2/ACE_Files/ ACE Files].
 * Reference Design:
  * The XPS Reference Designs used to generate the 2x2 and 4x4 MIMO bitstreams that work with Version 5.2 of the Reference M-Code are available [wiki:WARPLab/RefDesign here].
 

Notes on previous WARPLab releases can be found [wiki:WARPLab/OldReleases here].