Version 4 (modified by murphpo, 16 years ago) (diff) |
---|
WARPLab
WARPLab is a framework which brings together WARP and MATLAB. With WARPLab, you can interact with WARP nodes directly from the MATLAB workspace.
This documentation is a work in progress. Please check back as we improve it.
Requirements
- At least two WARP nodes
- A PC with MATLAB
- An Ethernet switch
Getting Started
- Install Peter Rydesäter's open-source TCP/UDP toolbox for MATLAB (get it free from MATLAB Central).
- Download the WARPLab source code to your PC (get it from the repository). Put the code somewhere in MATLAB's path.
- Connect your PC and two WARP boards to a common Ethernet switch. Ideally, nothing else should be connected to the same switch.
- Set your PC's IP address to 10.0.0.200
- Set the DIP switches on two boards to 0 and 1
- Download the WARPLab bitstream (warplab_siso.bit) to both boards (get it from the respository).
- Try one of the examples. The GUI (warplab_siso_Gui) is the best one to start with.
Attachments (2)
- warplab_architecture.png (46.1 KB) - added by chunter 12 years ago.
- warplab_setup.png (72.5 KB) - added by chunter 12 years ago.
Download all attachments as: .zip